FOGLIGHT REMOVAL

[BanGn]

is it possible to take it out without removing the front bumper??

[negatron]

is it possible to take it out without removing the front bumper??

←

yes, i'll show u at drag day

just bring something so i don't need to lie on the road whilst i'm doin it for ya.

[justin_es]

or if you both come to the meet tonight do it tongiht

it doesnt take long to do and isnt very hard

so why dont you both come

cheers hehe

[MR22ZZ]

Justin... it along way for them to come from Melbourne...

it's pretty easy

step 1 - locate the panel in front of the wheel arch underneath the car

step 2 - remove the blister plug and 2 screw that secure it in place

step 3 - open the panel (may need to shimmy it out a bit but don't worry, it's hard to break

step 4 - unplug the red plug on the top of the light fitting

step 5 - locate the press locks on the side of the light fitting to the inside of the car (should be 2)

step 6 - use you fingers (or is that fails some pinchers or even a flat scredriver) for pinch the press locks and push the light fitting out

step 7 - stand back and marvel at the ease in which these things are removed and have a beer

step 8 - replace the undertray panel and screw back in place and replace press stud.

[justin_es]

oh yeah haha i didint realise

hey the plug that plugs into the globe itself

is it a loose wire

i mena can i relcate the light from the front of the bumper

to say the back of where the small box is where the fog light is in

or do i need to explain myself more LOL

[Mello]

meet 2nite? arent u in sydney?

negatron and bangn are melb bois

[justin_es]

yes i know that

didint you read the above posts

[MT]

does anyone know how much a new bulb for a fog light costs from toyota? because its not just a globe, the globe is attached the the water proofing plug in the back, so that we have to spend more money at toyota.

[negatron]

Justin... it along way for them to come from Melbourne...

it's pretty easy

step 1 - locate the panel in front of the wheel arch underneath the car

step 2 - remove the blister plug and 2 screw that secure it in place

step 3 - open the panel (may need to shimmy it out a bit but don't worry, it's hard to break

step 4 - unplug the red plug on the top of the light fitting

step 5 - locate the press locks on the side of the light fitting to the inside of the car (should be 2)

step 6 - use you fingers (or is that fails some pinchers or even a flat scredriver) for pinch the press locks and push the light fitting out

step 7 - stand back and marvel at the ease in which these things are removed and have a beer

step 8 - replace the undertray panel and screw back in place and replace press stud.

←

nah , my way u just go under the car to do it.

[justin_es]

with the 05 foggies you cant unclip them from the front through the grill

you have to get under the car to do it

what a pain LOL

[hotboxcivic]

how do you take out the cover, not just the light?

[hotboxcivic]

dw. got it out.