Jump to content


Recommended Posts

Posted (edited)

Hello,

I have a Toyota Camry Ateva 2004 V6 3.0L and I do not have a spare.

The tyres currently on the car have size 235/45ZR17 so they are not standard since the alloy wheels are 17 inch and the standard alloy wheels are either 15 or 16 inches.

Is there any way I can get a single 17 inch wheel that would fit my car?

Would it work if I get a 16 inch wheel and put a larger tyre on it?

I don't want to get a full set of wheels because the 4 wheels I currently have are in great condition.

Are there shops that sell single alloy wheels or custom wheels?

Edited by AXwFS0OIUDoE
Posted

Gumtree and eBay.

Thank you Trent. I have been searching there for a while and pretty much all of them are either 15 or 16 inches.

I am now thinking of getting a Ford Falcon XR6 17 inch wheel because apparently it fits on the Camry.

Posted

The offset and centre bore may be wrong on the Ford wheel. The 15 and 16 inch wheels should be fitted with a tyre of the same circumference as the 17 inch wheels, so that isn't an issue.


Posted (edited)

The offset and centre bore may be wrong on the Ford wheel. The 15 and 16 inch wheels should be fitted with a tyre of the same circumference as the 17 inch wheels, so that isn't an issue.

Thank you very much Trent. Great to know that I can get a smaller wheel and put a tyre on it that matches the rest of the tyres on the car. It is just a spare so I won't be driving on it a lot.

Edited by AXwFS0OIUDoE

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership