Jump to content


Recommended Posts

Posted

Hi, Ive got a 93 corolla with a 4afe 1.6L engine and ive been getting overheating issues lately. The water-pump, thermostat, radiator cap and coolant temperature sensor and new headgasket has been installed but it still overheats, when i turn it on it idles very high and does not overheat at idle but when i go for a drive it stays under half line on the temperture gauge and then after a few minutes doing high speed it starts to creep up and overheat, and also when i am slowing down and have the clutch in the revs hunt up and down from 1000 rpm to 2000 rpm and then when im stopped it goes up to 2000 rpm (the radiator fan works aswell and the throttle body and iacv have been cleaned). Thanks, help would be much appreciated


Posted

Can I ask who did all that work for you ?

It is possible the thermostat was installed backwards ??

Also sounds like you have a vacuum leak somewhere too. Does the serpentine belt slip ?

If everything checks out, it is possible you have a blockage somewhere, possibly within the radiator. Start with the thermostat.

Posted (edited)

The hunting seems like a bad or out of adjustment TPS, check it.

Does it consume coolant or oil excessively, does it blow smoke at the tailpipe?

How hot is the radiator outlet hose when it is overheating?

Edited by SRA

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership