Jump to content

my SRI DIY HOME JOB

DuGong

By DuGong
in Corolla / Corolla Sportivo Club

 Share

Recommended Posts

GAZOOM Veteran

GAZOOM

Posted
Posted (edited)

In Queensland (I just spoke to Qld Transport), any modifications to the intake system as long as you are able to meet the manufacturers specifications for engine emissions and compy to all local emission laws.

When asked if exposed pod filters are illegal, the response was NO as long as you are able to meet the manufacturers specifications for engine emissions and compy to all local emission laws.

Definately different to Sydney.

I have an email from RTA that basically says any modifications to the intake system must compy to all local emission laws and need to be certified by a registered engineer with an engineer certificate.

They supplied a list of engineer contacts to me.

Everyone that I called said exposed air filters in the engine bay cannot be certified by an engineer.

Edited by GAZOOM
Link to comment
Share on other sites
Blue_Steel Rising Star

Blue_Steel

Posted
Posted

So if the air filter is not exposed it should be alright then? :blink:

Since were on the subject of air intake. I'm on a fairly tite budget and the misses takes all the money. :(

I'm interested in purchasing a CAI system. Whats the cheapest CAI available? Will the ones on ebay suffice?

How much did you pay for yours?

Cheers

Link to comment
Share on other sites
Azza Grand Master

Azza

Posted
Posted

I scoured the RTA Website and I can not find any reference to modifications of intake systems. THis is the closest I can come up with...

NSW Vehicle Standards Information

I'd be disputing it and asking them to provide some certified documentation. Something other than an email...

Link to comment
Share on other sites

DuGong Veteran

DuGong

Posted
  • Author
Posted

cheapest diy air intake.. costs two zip ties..

unclip the box zip tie the filter to the top half.. leave unclipped.. you want response and noise..

did that.. the pod feels more... better... lol

revvyer to the top end.. and it also looks good too...

Link to comment
Share on other sites
Azza Grand Master

Azza

Posted
Posted

cheapest diy air intake.. costs two zip ties..

unclip the box zip tie the filter to the top half.. leave unclipped.. you want response and noise..

did that.. the pod feels more... better... lol

revvyer to the top end.. and it also looks good too...

Just don't do it in rainy, dusty or dirty conditions.....

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 4

      2005 Toyota Corolla miss fire on acceleration cant scan obd2

      If you haven't sorted the problem out yet, I would recommend looking into whether the intake manifold seals are leaking. These were very common, but it won't explain the ignition coil issue.
      Novicebutnice in Corolla / Corolla Sportivo Club
    2. 4

      2005 Toyota Corolla miss fire on acceleration cant scan obd2

      I recommend looking into replacing the intake manifold seals, these were very common.
      Novicebutnice in Corolla / Corolla Sportivo Club
    3. 0

      RATTLING CAMRY 2013

      I really hope someone can help me with my annoyingly loud problem… my camry has a loud rattle whenever its in gear, it stops once its in park or neutral. Ive checked the heat shields they are good. If anyone has any suggestions, ill be much appreciated… plus when its warmed up and driven around its harder to start. I’ve attached a video of the rattle, you can hear when i put it into gear it rattles then stops when its in park. My bad I’ve accidentally put two of the same vid (don't know how to delete it) IMG_2585.mov
      Atara in Camry Club
    4. 0

      Wtb 2005 Toyota corolla Sportivo parts

      Hi converting my 2006 Toyota corolla hatchback into a Sportivo Looking for some 2005 Toyota corolla Sportivo parts Side skirts no damage any colour is fine Rear spoiler Whole front bumper with with fog lights and wiring and switch or just the front lip All interior door trimmings front and back seats no damage front dash mount mat
      RuneUrsa in Corolla / Corolla Sportivo Club
    5. 0

      Corolla 3k modified engine + 5 speed box For SALE

      Hi all, I have owned this engine for approx 30 years, it has not run in the last 15 years. needs rebuild, at the least new rings. Was last informed that the Cam was not aligned correctly after the fitting of a new timing chain and head Was originaly a stock 3K 1.2L ke20 for the first 7 years before becoming tired and worn-out. I was so happy with the engine that i spent at least 2 thou on a full rebuild including rebore to 1.3L, very lumpy billit cam, hi comp ported head double springs,fully balanced, lightend flywheel.ect ect Due to budget I could only afford a 32 Webber down draught carby (probably needs new carby kit), stock distributer and a 5 speed manual Would very much like to see it go to a new home so it can come back to life and rev hard again. Please ask any questions you may have.
      toyoke20 in Group Buys
    6. 0

      Canning Prado or 200

      Hi All Just joined - trying to decide between a Prado or 200 for the CSR next year. l'll be a single in the car in a group of 5 vehicles. Not owing. I appreciate whatever I get will need some mods. And I know I am on the Prado Club forum but I am hoping for some unbiased opinion! The Prado needs to carry less fuel which is a big advantage but what I am more concerned about is whether it is rugged enough. Any thoughts and especially experience, much appreciated! Regards to all. Chris
      Chriskel in Prado Club
    7. 0

      Auto To Manual Swap Reverse Light Switch Wiring

      Hello, I am trying to figure out the reverse light switch wiring connections to complete the tranny swap in my Toyota Corolla 7AFE, just need some help to figure which two wires from the plug in the transmission that has to be connected with the reverse switch in-order for the Reverse bulbs to light up when I put the car in reverse, the wiring color of the bulb is Red with Blue for live and white with black for ground, Thank you!
      ind in Corolla / Corolla Sportivo Club
    8. 0

      2002 Door Handle Issue

      Unusual problem. Driver's side external door handle would not function with window in fully closed position. Would function with window open around 12mm. Removed door trim - visual inspection showed plastic clip at top of one of the actuating rods had become unclipped and was being hit by the metal rail on the bottom of the window glass when the window neared fully closed. Easiest solution was to apply Loctite Extreme Glue to clip and re-attach it to the rod. Fingers crossed it stays attached.
      Peter Cole in RAV4 Club
    9. 0

      What to say!

      I'm happy to be here. Right now I'm waiting on my new tools to get back to work.
      neverknowe in New Members Introductions
    10. 1

      Just joined

      Welcome to the forum Eric, well I also was devoted to aussie made vehicles but now they have dumped us I am pure Toyota and have been for many years. Enjoy the forum lots of great people here mate KAA
      KAA in New Members Introductions
×
×
  • Create New...

Forums

News

Membership