VVTLiR

Coilovers tend to have a lot of different problems and are not consistant with brands and circumstances. Its usaully just how it was set up. Easiest way I found was to rip em out, clean em, put em back in and hope for the best.

Nah you can go lower w/o compressign the spring and the sway links wont touch. Best way I found is to put it full lock to the one side, ajust the sway to fit that side, then full lock to the other side and sjust the sway links again and do that a few time till u get full locks w/o rubbing on one side or over extending on the other. Its a takes about 5-10min to get it right. Hope this helps.

It the same as the TRD. CES is a pain to fit as compared to the TRD due to the extra diametre piping.

May even pay to do a pedders 14 dollar safety check.

Yep Kaze sounds like another CV in a sportivo has gone. Maybe Toyota should do a recall. I blew both boots and cvs in my last car and drove it around for a year. Eventually you wheel lose steering and there is chance the cv may seperate which can be very dangerous. The stivo cvs and boots are very under engineered. Im thinking about getting them rebuild stonger (if thats possible). Here is a link that explains cvs http://en.wikipedia.org/wiki/Constant-velocity_joint

Its posible.

I thought Silva meant that he got his cvs fixed under warranty with kings and konis installed. CVs are pissweak in the stivos anyway, its a pretty common problem. Prob would have failed with stock suspension anyway if you drive it hard enough. How does the angle of the suspension account for the boot failures. Usaually the CVs fail after the boot is busted. They are rubber boots and can have a fair bit of angle in em, and mine dont stretch anywhere near all the way. I think toyota designed em to bust after being hit by stone.

DamnNN!!!!!

With coilovers dumped on its bum i get rubbing on the inner plastic guard where it lips up at the bumper connection. I just cut the section out for now, and am going to fill it the gap alter.

It looks like another one of these threads. Basically as a new car buyer, you gotta think to yourself is a DC5R worth 15 grand more then a Sportivo. Then there your answer.

I dunno what the chung chung sound was, the lubricant was a quick fix but it came back. I just took the coilover out, pulled it all apart to bits, put it back toghether and it is fine now. Its not just d2s, i have been reading heaps of forums and other jap brands ets have the same gremlin type issues. I think it comes down to set-up and the corolla has messy type front end with the sway links attached to the shockers so u gotta adjust these alot to get em right. Plus the D2 have alot of possible adjustements but with crap generic installation instruction. I prob post a step by step install soon so the rest of u guys can set it up right from word go. Neways the Street D2 handle absolutely awsome with a very good ride quality, I can pretty much floor it out of corners now with minimal wheels spin and there are not too many cars that can keep with me through corners, especially considering i dont have an lsd. Real bang for your buck performance.

yep sorry my bad.... looks like more ppl are having the same prob I oiled the top struts but it came back. So I just took out the coilover pulled it apart then put it back toghether and the noise was gone.

Just thinking the teeth may be differnet at the end of the shaft, for the celica gearbox than the sportivo. Crap thats not what i wanted to hear i was hoping that they would be the smae thickness.

ahh sweet I'm sure i can locate a celica one easier, thanks. Just wondering is your engine is a 1ZZ or 2ZZ. If 2ZZ is it out of a sportivo or celica.

I rang toyota part number is 4341002480 for the stivo, but he said the part number is different for the celica.

where can I find the part number?

I see, prob need to take it out and get it rebuit. how about celica driveshafts?

Its the drivers side. I couldn't find an exchange sportivo one, well any1 who knew the difference anyway. Maybe I should get a billet driveshaft from the USA, prob wont break then.

$1400 are you serious, they are like $120 second hand, what a rip off. I thought about getting it rebuild but dont wanna have my car out of commision. I just wanna take the shaft out on saturday morning and have it finished within an hour or two (need to refill trans fluid etc)

my only concern is that the the threads on the end of the shaft dont match up to the gearbox. Any Ideas? or if any1 know where I can get s Sportivo driveshaft that would be better (dont say toyata cuz they will prob charge a fortune when they are pretty cheap second hand).

Are the driveshats the same for the sportivo (zze123) and the regular corollas (zze122), cuz i'm having trouble sourcing a sportivo one from the wreckers.

Dunno what the click is but it has come back today again, when I went up my work driveway (its a bit of a mofo since I end up with 1 or 2 wheels off the ground ehen going up on an angle) and kept makes that noise till I parked it. Maybe some1 can contact D2 and find out, it really annoying.

Ok, I didn't realise that. I was hopping it would be quiet. Oh well I greased it up anyway just incase. So I'm assuming all coilovers make that noise, weird oh well I'll just turn up the stereo. Thanks for all your help guys.

Took it for another drive and the clong clong and clicking is gone just, got that sqeezy sound (sorta sounds like when you sqeeze a rubber toy and the air comes out) over bumps and turning. I've bought some Nulon Xtreme Performance Grease so i'm gonna grease up every joint under neath the wheel. I will also give the coil a wash since i have alot of dirt in the coilover so that may be contributing to the noise.

Just put some handy oil in it. The chung chung seems to have gone away, but getting some clicking and sqeezy sort of noises. I'll lube up everything in my suspension this avo and see if fixes that too.