Jump to content


Bigpete

Regular Member
  • Posts

    143
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by Bigpete

  1. Googles proberley the best place to start
  2. Looks like a bit of a mess with 85-87-86 all linked not your average wiring and why two relays in series
  3. Not sure what you are after but the circlip 36321 flick it out and the stick will come out
  4. Ive got an x miner as well frankly the mechanics they have at different sites hardly make the grade ,go back and try to find where they tapped into the wiring loom ,its going to be maybe easy to find or a ****show get your test light a wiring diagrahm good luck
  5. Looks as if youve found the name -p/n time to trace back on the wiring could be used for a multitude of things ,because its sparking would indicate its in poor condition or badly mounted investigation is your answer
  6. You to have the same issue , They say Pioneer wont connect to Toyota
  7. Yer in the box fully sealed in plastic bag ,12 month warranty , but warranty could be nil ,simpley as crook fuel ,they work ok good values just rattle
  8. No cant really help , Just think ill never buy reman injectors again ...
  9. I Did seems if you have a issue the responce is youve had dirty fuel , I even bought to their att about dirt left in the electrical connector when i unpacked response was they must have been recond by the supplier ,but in a Denso box sealed with plastic ,the suppliers were not happy to hear that . Im ringing again tomorrow stay tuned ,not that i expect much more than Dirty Fuel caused that what warranty
  10. Hi Sometime ago at 180000 km had a dead injector no 1 ,replaced all inj with genuin remans done 215000 rattle their heads off when coasting quiet under load \ rang up the mob for a solution was told had a dose of dirty fuel , not possible cause all my vehicles and machines use the same tank , so has anyone used a product to quiten down the rattle with sucess thanks
  11. Reckon be all the same ,dont know the controls would work , Ive got a later wheel with controls on it if you like .
  12. Be a number , from the pedals to trans coolers ,wiring , really get a vehicle already as an auto be **** loads easier
  13. If the boss and spline are the same ,be all good
  14. Maybe check or change your SCV valve
  15. Try the SCV suction control valve ,i think if its the long one there crap get the short one ,google them and its location
  16. Take a spare battery never know out in the nunga-nunga
  17. You checked the pickup in the fuel tank might have a bit of crap that gets sucked up on a long run
  18. Has it got a throttle cable
  19. Back before 2008 was not compliant to fit code reader ports so could be something toyota have although the port may have been installed could not be read ,had a 2006 navara that would only be read by obd1 although the plug was the same as the obd2 plug ,Isuzu have one looks the same but will only take their reader plug ,bit of stuff on google
  20. Check all your connections
  21. Go to Toyota check in parts
  22. If its been flogged could be the transfer case chain taking up the slack
×
×
  • Create New...

Forums


News


Membership