I can help at the group install if you guys organise it somewhere, im sure luke wouldnt mind coming too, seriously its not hard
there are instructions on here already :P
cudos to Kuan (KT_haha)
http://au.toyotaownersclub.com/forums/inde...amp;#entry25847
only two images i took when installing
1. carefully just pull off the original sill
2. then you can move the carpet to the side and you will see a bunch of cables all wrapped up in black tape (ignore the red and blue, they're cables for my sub)
3. slice this bundle open carefully so you don't cut anything, slice with the flow of cables so you can open it up like you're operating on someone :P
4. the red wire on the transformer connects to the corresponding +ve wire (as i said, you can just use the same colour for all four doors, don't need to follow what KT says, cause when one door opens all 4 turn on anyway (thought it might be good to use at least 2 different wires as then you'll spread the load))
5. black goes to negative -der face
6. the little box makes a slight buzzing sound when it's on, test before you solder anything, when you have the right wires, solder and tape up, tuck the box somewhere under the carpet and
INCASE PEOPLE DONT KNOW, THIS SILL SITS ON TOP OF YOUR ORIGINAL SILL, IT DOES NOT REPLACE IT
7. clean the original sill and peel off the tape on the light up one
8. stick the light to your original sill and hold it firm
9. run the wire long your original sill, you'll work out the best way to hide this
10. then reinstall the new complete sill
wa lah, crack open a beer and enjoy the show