Jump to content

Presara - Bluetooth

noble

By noble
in Aurion / TRD Aurion Club

 Share

Recommended Posts

noble Progessing

noble

Posted
Posted

:help:

I just signed up as a new member and am still finding my way around. I'm getting my new Presara tomorrow (can't wait) and I have a question about the built-in Bluetooth system. Thus far, my dealer hasn't been able to give me a satisfying answer.

The Presara brochure says that "Bluetooth will only operate with telephone enabled with compatible Bluetooth wireless technology (HFP [Hands Free Profile] version 1.0 and OPP [Object Push Profile] version 1.1 international standards)."

I don't want to buy a phone that is not compatible, but it seems that all mobile phones currently on the market are "compliant with Bluetooth Specification 2.0 supporting the following profiles: . . . Object Push, Handsfree, . . . " (quote from the phone connectivity specs). Is the Bluetooth system in the Presara old technology or is it compatible with any Bluetooth mobile phone that supports Handsfree and Object Push??? The phone I'm considering is a Nokia 6300.

Hope someone can help.

Cheers

noble

P.S.: Looking forward to having some good discussions here.
ME70 Enthusiast

ME70

Posted
Posted

I understand tge system is from Lexus and is the latest. I have a i-mate K-Jam, which connected instantly...if that helps.

Enjoy your new ride..........wise decision!

Chhers, Mark

jonbays Proficient

jonbays

Posted
Posted
:help:

I just signed up as a new member and am still finding my way around. I'm getting my new Presara tomorrow (can't wait) and I have a question about the built-in Bluetooth system. Thus far, my dealer hasn't been able to give me a satisfying answer.

The Presara brochure says that "Bluetooth will only operate with telephone enabled with compatible Bluetooth wireless technology (HFP [Hands Free Profile] version 1.0 and OPP [Object Push Profile] version 1.1 international standards)."

I don't want to buy a phone that is not compatible, but it seems that all mobile phones currently on the market are "compliant with Bluetooth Specification 2.0 supporting the following profiles: . . . Object Push, Handsfree, . . . " (quote from the phone connectivity specs). Is the Bluetooth system in the Presara old technology or is it compatible with any Bluetooth mobile phone that supports Handsfree and Object Push??? The phone I'm considering is a Nokia 6300.

Hope someone can help.

Cheers

noble

P.S.: Looking forward to having some good discussions here.

Toyota dealers are much help with Bluetooth thats for sure. The 6300 will connect in hands free mode to the Presara no problem. The HFP is not an issue really version 1 or 2. The OPP may not be compatible which will mean you can't synch the contacts from the phone to the car. it's not a huge deal but quicker than entering them manually. I have a Nokia N73 and the HFP works fine. the OPP was not good but have reloaded different firmware on the phone now and haven't tried since so not sure its a no go just can;t be bothered trying again.

noble Progessing

noble

Posted
  • Author
Posted
:help:

I just signed up as a new member and am still finding my way around. I'm getting my new Presara tomorrow (can't wait) and I have a question about the built-in Bluetooth system. Thus far, my dealer hasn't been able to give me a satisfying answer.

The Presara brochure says that "Bluetooth will only operate with telephone enabled with compatible Bluetooth wireless technology (HFP [Hands Free Profile] version 1.0 and OPP [Object Push Profile] version 1.1 international standards)."

I don't want to buy a phone that is not compatible, but it seems that all mobile phones currently on the market are "compliant with Bluetooth Specification 2.0 supporting the following profiles: . . . Object Push, Handsfree, . . . " (quote from the phone connectivity specs). Is the Bluetooth system in the Presara old technology or is it compatible with any Bluetooth mobile phone that supports Handsfree and Object Push??? The phone I'm considering is a Nokia 6300.

Hope someone can help.

Cheers

noble

P.S.: Looking forward to having some good discussions here.

Toyota dealers are much help with Bluetooth thats for sure. The 6300 will connect in hands free mode to the Presara no problem. The HFP is not an issue really version 1 or 2. The OPP may not be compatible which will mean you can't synch the contacts from the phone to the car. it's not a huge deal but quicker than entering them manually. I have a Nokia N73 and the HFP works fine. the OPP was not good but have reloaded different firmware on the phone now and haven't tried since so not sure its a no go just can;t be bothered trying again.

Thanks guys. There seems to be a wealth of knowledge in this forum.


rimmeroz Explorer

rimmeroz

Posted
Posted

My nokia 6300 , e65 , motorola v360 all connect to the blutooth first time.

THe only thing to remember...when your talking and then turn the car off when your stopped disconnects it. Wish there was a way of turning the ignition off without loosing connection. I end up sitting in the car with the engine running until i finish my conversation. Then again I might not have read the instructions :)

DerekD Collaborator

DerekD

Posted
Posted
My nokia 6300 , e65 , motorola v360 all connect to the blutooth first time.

THe only thing to remember...when your talking and then turn the car off when your stopped disconnects it. Wish there was a way of turning the ignition off without loosing connection. I end up sitting in the car with the engine running until i finish my conversation. Then again I might not have read the instructions :)

I've found that if you DO NOT put the car in "Park" before you turn off the engine, the accessories stayed up powered up. I think that will allow you to keep talking on the Blue tooth without the engine running. Try that.

AUS_ZR6 Progessing

AUS_ZR6

Posted
Posted
My nokia 6300 , e65 , motorola v360 all connect to the blutooth first time.

THe only thing to remember...when your talking and then turn the car off when your stopped disconnects it. Wish there was a way of turning the ignition off without loosing connection. I end up sitting in the car with the engine running until i finish my conversation. Then again I might not have read the instructions :)

I've found that if you DO NOT put the car in "Park" before you turn off the engine, the accessories stayed up powered up. I think that will allow you to keep talking on the Blue tooth without the engine running. Try that.

That sounds RIGHT! Put the car in NEUTRAL and turn the engine off. The electronics stay on in my Aurion to allow me to enjoy my CDs whilst waiting for the wife.

noble Progessing

noble

Posted
  • Author
Posted
My nokia 6300 , e65 , motorola v360 all connect to the blutooth first time.

THe only thing to remember...when your talking and then turn the car off when your stopped disconnects it. Wish there was a way of turning the ignition off without loosing connection. I end up sitting in the car with the engine running until i finish my conversation. Then again I might not have read the instructions :)

Thanks mate. Bought a 6300 and it works perfectly.

rimmeroz Explorer

rimmeroz

Posted
Posted

THanks.. it worked a treat.

Would you happen to know if there is a way to stop the door alarm from chimming when you are listening to music and want to have the door open?

melvinlau Experienced

melvinlau

Posted
Posted

With regards to issues with mobile phone compatibility, Toyota and Lexus will always try and attain the highest global standard for Blutooth. In my experience ALL the nokia phones I have connected work very well, most Motorolas work well (some won't connect automatically) and the same with Samsung. I have had clients who have phones that couldn't stay connected to the system, so they went out and bought the same phone as me so they knew it would work.

Most Toyota dealers aren't very helpful with SatNav and Bluetooth questions, mainly because they have dinosaurs as salespeople who don't have mobile phones.

If you have any questions about this please let me know.

dannywss Grand Master

dannywss

Posted
Posted
... because they have dinosaurs as salespeople who don't have mobile phones.

ROFL :yahoo:

if u r in melb, i will surely intro all my friends to buy car from you, and my next car too!

hv NEVER seen a salesperson soo "into" his job

melvinlau Experienced

melvinlau

Posted
Posted
... because they have dinosaurs as salespeople who don't have mobile phones.

ROFL :yahoo:

if u r in melb, i will surely intro all my friends to buy car from you, and my next car too!

hv NEVER seen a salesperson soo "into" his job

I should really move to Melbourne, I think I'd make a fortune with all you boys in here lol. Unfortunately there aren't too many members in Perth, but I am still happy to help all the Perth boys, and what ever I can do for you boys over east.

  • 3 weeks later...
Scooby Advancing

Scooby

Posted
Posted (edited)

I have a Presara and have tried several phones on the car kit the Nokia 6300 does work in the car.

Some how I can't get the Nokia E65 to work.

My IPOD interface module works fine. My playlist can be controled from head unit.

Regards,

Scooby

Edited by Scooby
DerekD Collaborator

DerekD

Posted
Posted
I have a Presara and have tried several phones on the car kit the Nokia 6300 does work in the car.

Some how I can't get the Nokia E65 to work.

My IPOD interface module works fine. My playlist can be controled from head unit.

Regards,

Scooby

Hello Scooby,

Please tell me more about the IPOD inferface you mention? I assume its Blue tooth, is it an Apple unit or aftermarket, Make, Model,

any other details, Price, Photo's etc etc.....

I have a Presara also, can you use the IPOD interface as well as have a mobile phone blue tooth connection?

Thanks Derek

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
    2. 5

      High RPM Idle after the engine warm up.

      i have same problem, already changed throttle body, ecm modle, help pls
      moxabest in Inside and Out
    3. 0

      Tow bar

      Hi guys, Just bought my new Landcruiser Prado yesterday. What is the difference between Onroad Towner and Off road Towbar
      Kiru in Prado Club
    4. 3

      Disconnecting winch, lightbar and UHF

      Generally, yes. In the 60s, and earlier, there were cars with positive grounds, so I'm always a bit hesitant to say the negative wire. It is always the one that bolts to the body. Herb
      ozieagle in Landcruiser Club
    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

      Hi everyone, I have a 2011 Land Cruiser VDJ200 with a 1VD-FTV engine. I recently had the engine fully overhauled due to a blown head gasket. However, after the overhaul, the engine is not starting. It only cranks but doesn't fire. I've checked the following DTC codes: Internal memory EEPROM error Low rail pressure The actual rail pressure data shows: 240 bar during cranking 61 bar when ignition is off Based on these findings, I suspect the following potential causes: =Defective Diesel High-Pressure Pump =Leaking Piezoelectric Injectors =Diesel Fuel Bypassing to the DPF Circuit =Faulty Injector Drivers I'm hoping for some expert advice to help diagnose and resolve this problem I'm seeking expert advice on how to troubleshoot and resolve this issue. Any suggestions or guidance would be greatly appreciated.
      kevin200 in Landcruiser Club
    6. 3

      Disconnecting winch, lightbar and UHF

      Okay this might be dumb but it the ground the negative?
      citrus__grove in Landcruiser Club
    7. 3

      Disconnecting winch, lightbar and UHF

      Disconnecting batteries, ALWAYS disconnect the ground wire first. Doing this will also disconnect power, in general. Herb
      ozieagle in Landcruiser Club
    8. 3

      Disconnecting winch, lightbar and UHF

      Hey guys, I’m wanting to disconnect my current winch, lightbar and UHF as I have new plans. I’ve installed a winch previously on another car so I get it’s a case of following the cables and disconnecting from the battery, etc but but safety wise, should I start by disconnecting the battery so the cables aren’t live orrrr? And if so how do it go this haha?
      citrus__grove in Landcruiser Club
    9. 1

      Snapping wheel and axle studs

      Put a set of standard wheels on it and your problem will disappear. It is critical that the hole in the wheel centre is a snug fit on the axle boss (without wheel nuts fitted). If your wheels are sloppy on the axle boss this allows excess force on your wheel studs and they will break, as yours are doing. If you are unsure of what to do, go to a reputable tyre shop and get assistance.
      32V8 in Landcruiser Club
    10. 0

      2zz idle / roughness when accelerating past 3k

      Hey everyone was hoping someone might be able to point me in the right direction with this issue I've been facing for a while now. My Celica's idle will drop down to almost 200rpm when stationery after hitting operating temperature. Pretty much feels like it's about to stall out but never actually does. When taking off from a set of lights it almost feels like it hesitates or is down on power and then all of a sudden it lurches forward and gets a boost in power again. Then again around 1,500-3,000rpm it feels down on power and in what I can only describe in the engine feeling scratchy. Past 3,000 rpm it gets a little boost in power again but still definitely feels down on power compared to what it used to be and still has that roughness. Note lift is also not working at the moment but I have changed the lift bolts, planning on cleaning the VVT and VVTL-i OCV's New engine mounts have been installed I changed the MAF sensor about 4 years ago albeit not OEM. After doing some research my main ideas now would be a New MAF this time OEM, TPS, IACV or Coil Packs (Changed plugs 50,000km ago) Any other suggestions would be greatly appreciated!!! :)
      ik04 in Celica Club
×
×
  • Create New...

Forums

News

Membership