4 speakers 1 amp 2 channels?

[RoLLa 3]

Hi

i have an amp which is 2 channel 500w max 250w per channel max

don't now the RMS becoz it hasn't arrived yet

i want to hook up 4 speakers to it until i get sum subs

but i don't know how..

i got the two front 4" speakers 2way they are

100w max per speaker

20w rms per speaker

& it says 4 impedance on each speaker..

the 2 back speakers are 6.5" 4 way

250w max per speaker

150w rms per speaker

Frequency: 45 - 20KHz

Sensitivity: 90dB / W / M

Magnet: 10 oz

doesn't say about impedance

how do i connect these four speakers to the 2 channels without over powering them ?

Edited March 23, 2008 by RoLLa 3

[JJCRU23R]

if you wanna keep it simple, put all the settings down to a minimum, or get a 4 channel amp.

you wouldnt/shouldnt set your amp to give the speakers the maximum they can handle!

but if you gonna try with 2 channel amp, im guessing youre gonna be twisting the 2 fronts and the 2 rears to fit them into the 2 channels.

1 channel = fronts, 1 channel = rears.

if you want it considerably loud... set the fronts to 180w on the amp (just to be safe..dont want to accidentally push more than 200w for the fronts), then play around with the settings of the rears to check which setting suits you best. The rear speakers can handle more than what your amp can push out, so play round with the rear 2nd channel to see which setting best matches your fronts.

Edited March 28, 2008 by JJCRU23R

[RoLLa 3]

which amps have the option for me to set the watts?

coz all ive been finding is the max of the amp and the rms .. n you cant change that can you?

[X-Power]

was gonna say something but j_J is right.

Edited April 9, 2008 by X-Power