rear lip will block exhaust?

[Brad-dreama]

if attaching a rear lip with the stock exhaust would it be bad for the car by not letting the exhaust breath properly?

or will it be fine?

[Phat]

your rear lip will melt due to the heat. most people normally get it cut or modify the exhaust tip.

[chicken]

if attaching a rear lip with the stock exhaust would it be bad for the car by not letting the exhaust breath properly?

or will it be fine?

what rear skirt is it? there are a few topics on this in the forums, have a look.

[chicaboo]

Just get a dump tip for your stock exhaust. :)

[Brad-dreama]

good idea.

well its the cw rear lip.

[chicken]

good idea.

well its the cw rear lip.

oh ok, is that the one from Croatian Princess? its got the cutout already doesn't it

[Brad-dreama]

all cw have a cutout.

princess didnt cut any more than what it came with.

it seems like its not to be fitted with stock exhaust. otherwise it sits too high.

ill cut a bit extra off to make it fit otherwise..

[vvti16v]

If your talking about a 1ZZ then u dont need to do anything, but if your talking abt 2ZZ then you should cut the rear lip.

ex1.bmp

ex2.bmp

[Rolla Boy]

Don't cut the lip, just dump tip the exhaust...

Exhaust will sound better and the lip will look better...

[Matrix]

If u leave it uncut with the stock exhaust. it will most likely melt.

Just saw it a little to the shape of the exhaust. It'll look neat.

Just an example:

Edited January 22, 2009 by Matrix

[Brad-dreama]

if i got a dump tip what size should i get for my stivo?

isn't there already a tip on it from stock?

[$ANGELO$]

for the sedan owners and i dont even have a rear lip!

[RODNZ]

Well when I got my rear lip put on I had a choice of cutting the lip or get the exhaust tip rewelded, I went with the rewelded option. I got them to lower it and extend it so it now sits lower and extended a bit so the fumes dont mark the rear bumper

I have a TRD High Response Muffler

Ive seen rear lips here in NZ put over the back, looks as though the factory exhaust tip is pointed down and no modification is needed

Edited January 24, 2009 by RODNZ

[yangjimmmy]

anyone know how to put the rear lip on?!
Im having trouble putting it on. The hooks on the rear lip dont match the hooks where u bolt it onto, on the corolla sportivo. I think it was for levins but Im guessing yoiu could still use it on the sportivo.
Any help?
Thanks jimmy

[GHOSTIVO]

anyone know how to put the rear lip on?!

Im having trouble putting it on. The hooks on the rear lip dont match the hooks where u bolt it onto, on the corolla sportivo. I think it was for levins but Im guessing yoiu could still use it on the sportivo.

Any help?

Thanks jimmy

Are you talking about the brackets that are under the rear lip(or behind) if so my ones don't line up with the rear bar also. I just used the bracket that's on the lip and drilled a few new holes into the rear bar.i used a bolt to hold them in and its been fine ever since. you won't be able to see the new holes anyways. Hope that helps. Edited April 8, 2013 by GHOSTIVO

[Trickey]

Just get it cut out from the panel beaters, then take it to an exhaust shop.

That's what I did anyway, looks great.