-
Latest Postings
-
0
O2 sensor issues
Hi everyone, My kluger 2009 with 137250 kms was having P0420 code so I have installed a new O2 sensor now it shows different codes every time it will be P0032 and P2195 and so on what would be the exact reason for this please help solving this. 🙏🏻 -
0
2012 Hilux with snorkel stopped after getting stuck in water
Hi guys, my sons 2012 Hilux (diesel) engine stopped when he got stuck in a deep mudhole last night. I had a quick look after driving for about 130km with a car trailer to get his car and it has been immersed in muddy water over the top of the battery. The water level on the inside of the car apparently reached top of seat height before they managed to snatch it out of the water. The car has a snorkel, however, the engine stopped whilst the hilux was still immersed in the water up to its bonnet. What would have caused the engine to stop? Typically what would one expect to need to clean out, replace etc in order to sort this? -
21
FUEL WARNING MESSAGE
Definitely can't get the pump out through the hole in the floor. The top of the pump has a larger diameter than the hole. 2nd pump has arrived from the wrecker. I will be removing the tank and installing it today. -
21
FUEL WARNING MESSAGE
Jeez that's unfortunate. Here's hoping the next one makes it to the right place. I've spent a long time looking, but I haven't seen any videos or images where that mechanism has come out through the inspection hole - I really hope I've just been looking in the wrong place! I've got my fingers crossed for you Geoff!! -
2
MWR Oil Pump
Thanks for your response, I’m just hoping and praying that the oil pump will withstand the over-revving which is why I purchased the product. Also, I know very well about the flaws of the 2ZZ in regards to the oil pump and oil sump.- oilpump
- toyotacelica
- (and 1 more)
-
0
-
2
MWR Oil Pump
MWR are a reasonably respected name in the aftermarket 2ZZ business, they're not the cheapest (especially with shipping) but the products are usually solid. In this case though it is only the oil pump gear itself which is upgraded (as that was the issue with the stock ones), the housing is new/refurbed OEM Toyota/Aisin. FYI 4340 is the grade used, it's a high-tensile chrome-moly steel. I believe the stock ones are sintered (ie powdered steel pressed in to shape at high pressure/temperature), which contributes to their propensity to shattering (although I think it is much rarer than people are lead to believe, and usually as a result of over-revving via mis-shifting)- 1
-
- oilpump
- toyotacelica
- (and 1 more)
-
0
Engine starts but won’t rev, only idles. 2002 Hilux 4d4
I left my fridge on in car for five days and it completely ran the battery flat. I have replaced with new battery and engine starts but only idols cannot be revved at all. Any ideas? -
0
Faulty speedo
Hey everyone after advice .have a 99 hilux and my speedo will read fine one moment and then will read excessively high as in off the clock at about 60 and says I'm doing 90 at at 30 any idea's on what to check would be massively appreciated. -
2
MWR Oil Pump
My new Monkeywrench Racing Oil pump came in the mail last week ago, which had been shipped from RideRound.nl in the Netherlands. Does anyone know anything about Monkeywrench Racing? Do you all think I made a good choice buying this aftermarket oil pump? I ordered it to to upgrade from the stock OEM one which is vulnerable to disintegration. The aftermarket one is meant to be bulletproof because it is made from some type of so-called '4340 steel'.- oilpump
- toyotacelica
- (and 1 more)
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.