Lug nuts on Corolla

[glamachickybabe]

Hey, was looking around for a few bits and pieces and found my old lug nuts 1.5

Would anyone know perhaps if these would fit the thread on my conquest facelift?

Im still using the conquest alloys, would they fit? They are 40mm long nuts.

They are still in good condition and thought since they arent being used and i need to

do a rotation, i may aswell use them.

(P.S, I have done a search and couldnt find specifically on this topic, so sorry if im asking answered questions)

Cheers,

Michael

[DreadAngel]

I think Toyota still uses 1.5 Pitch from memory so you can use :)

As long as they have the right end (usually factory alloys like flat end while aftermarket like tapered end)

Edited February 28, 2010 by DreadAngel

[glamachickybabe]

mate, thanks for your responds. Do you mean tapered end as in it comes slightly to a cone/point?

[and1]

mate, thanks for your responds. Do you mean tapered end as in it comes slightly to a cone/point?

Yes most after rims use these lugs. However factory toyota rims use the flat end with a washer..

[glamachickybabe]

Ah ok, so if your planing to use lug nuts with tappered ends on a stock rim, you need to apply a washer on the end?

[and1]

Ah ok, so if your planing to use lug nuts with tappered ends on a stock rim, you need to apply a washer on the end?

No it won't be a nice fit. Plus you will end up damaging the thread on the stud and destroy your lugs.

You can't use tapered nuts on stock toyota rims. Period.

Look here for the type of nuts you need

[keioffice]

great stuff!