Replacing indicator globe in mirror

[CONROD]

Would like to know what procedure to follow if ever I have to replace one of the globes in the mirror.

Does the whole light clip out or do I have to remove the mirror to gain access.

I looked through all the topics but I couldnt see anything on this subject, thanks

[czaja74]

You wil need gently remove cover and then you will see screws holding clear plastic thingy. Once removed you will have access to bulb. There is no need to remove mirror.

Edited March 29, 2010 by czaja74

[CONROD]

Would like to know what procedure to follow if ever I have to replace one of the globes in the mirror.

Does the whole light clip out or do I have to remove the mirror to gain access.

I looked through all the topics but I couldnt see anything on this subject, thanks

:Thanks czaja74,

so what your saying is the whole plastic frame surrounding the indicator clips off revealing the light assembly which is held in place with a couple of screws, just need to clarify, thanks

[czaja74]

Would like to know what procedure to follow if ever I have to replace one of the globes in the mirror.

Does the whole light clip out or do I have to remove the mirror to gain access.

I looked through all the topics but I couldnt see anything on this subject, thanks

:Thanks czaja74,

so what your saying is the whole plastic frame surrounding the indicator clips off revealing the light assembly which is held in place with a couple of screws, just need to clarify, thanks

Thats correct. :)

[GSV40R]

The painted cover is clipped into place , once off there is 3 screws securing the lamp and they are torx head screws

[Simon Hoby]

For the record, the info here from czaja74 is correct, I just did this myself.

You need a flat head screwdriver to gently lever the back cover off which unclips relatively easily. Then you need a Y-25 torque head screwdriver to remove the lense cover.