Jump to content


decision on how low to go for corollla sportivo ZZE123R 05

William_

By William_
in Corolla / Corolla Sportivo Club

 Share

Recommended Posts

William_ Collaborator

William_

Posted
Posted

hi just want a few opinions on how low to drop my corolla sportivo, sorry if this is reposting old posts, but am new =). The springs ive chosen are Pedders, yet not sure how low to go. I want it to sit low but not so low that it will scrape. Please leave ur opinion on what would be the best decision to make, many thanks will.
NickReilly Progessing

NickReilly

Posted
Posted

I bought mine just recently and it came with king springs. I have 140mm of ground clearance on the side bumpers and it is a good height I had stock wheels so it is pretty low and stiff but speed bumps don't shatter my pelvis and my exhaust is still intact. :)

Hope that helps.

Noodle Boy Grand Master

Noodle Boy

Posted
Posted

according to my knowledge, the lowest legal ground clearance for any car here in Aus. is 10cm(100mm). that might help you decide.


Damnfuzz Proficient

Damnfuzz

Posted
Posted

I'm running Pedders Sportsryder springs on my '05 Sportivo at the moment. I have 215/45s wrapped around my 17s, but the attached pic should give you an idea on ride height. I need to be careful getting in and out of steep driveways etc but its not unbearable.

Shoot me a PM or just reply if you want any more info or measurements.

Adrian

post-18226-128593592406_thumb.jpg

Kenshin X Grand Master

Kenshin X

Posted
Posted

I'm running Pedders Sportsryder springs on my '05 Sportivo at the moment. I have 215/45s wrapped around my 17s, but the attached pic should give you an idea on ride height. I need to be careful getting in and out of steep driveways etc but its not unbearable.

Shoot me a PM or just reply if you want any more info or measurements.

Adrian

is that a orange sportivo!? :o

a green one is coming to the streets of melbourne soon :lol:

and to answer your question. i bought mine wih king springs super lowers. scraped everywhere but that will leave some mistakes until i decide to repaint it ;) they are 12mm off the ground BTW. i find this height most comfortable as i can clear my driveway well

daniboy Mentor

daniboy

Posted
Posted

I'm running Pedders Sportsryder springs on my '05 Sportivo at the moment. I have 215/45s wrapped around my 17s, but the attached pic should give you an idea on ride height. I need to be careful getting in and out of steep driveways etc but its not unbearable.

Shoot me a PM or just reply if you want any more info or measurements.

Adrian

is that a orange sportivo!? :o

a green one is coming to the streets of melbourne soon :lol:

and to answer your question. i bought mine wih king springs super lowers. scraped everywhere but that will leave some mistakes until i decide to repaint it ;) they are 12mm off the ground BTW. i find this height most comfortable as i can clear my driveway well

nice i would like to see a sportivo 12mm off the ground hahahahahahaha you must have a super flat driveway :P

Damnfuzz Proficient

Damnfuzz

Posted
Posted

Oops, file size a little too big... sorry everyone, especially you old 56K users...

And no, the Corolla isn't orange... :clap:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 10

      Android auto

      OK. Does any of Toyota's advertising material mention Android Auto? If so then kick up a stink, with Toyota management, about misrepresentation and false advertising, reminding them of the hefty fines. Herb
      ozieagle in RAV4 Club
    2. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    3. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    4. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    5. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    6. 10

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    7. 10

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    8. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    9. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    10. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
×
×
  • Create New...

Forums

News

Membership