Jump to content

How to remove Map Light Console.

OPA53N

By OPA53N
in Aurion / TRD Aurion Club

 Share

Recommended Posts

OPA53N Contributor

OPA53N

Posted
Posted

Hi guys.

Ive been doing some research around trying to remove the map light console (the whole bit where the map lights are above the rear view mirror). Ive looked every where and cant seem to find any guides.

I was going to try and see if I can pop it out with a screwdriver but I don't want to damage the roof lining.

Its a really long story but as I was upgrading my map lights to led's the little switch inside actually came loose and was floating around in my roof lining.... I was not impressed. So I need to put that switch back in.

Any help would be greatly appreciated.

Cheers..

DJKOR Grand Master

DJKOR

Posted
Posted

Excuse the poor lighting:

OPA53N Contributor

OPA53N

Posted
  • Author
Posted

I knew I could rely on you Daryl!

I hope you didn't go out of your way and film that just for me! hahahah!!!

cheers your a champion!

:yahoo::yahoo::yahoo:

william777 Mentor

william777

Posted
Posted

Thanks DJKOR, I was also trying to get it out. Looks so easy if you know how.


  • 8 months later...
KFuller Member

KFuller

Posted
Posted

I have a Prius v III and would like to access the area behind the map/dome light panel. Your video is great but I find my console to be much more stubborn and I'm afraid of damaging the console. Is the Prius v III map light console installed the same as your example.

Thanks

Audio115 Community Regular

Audio115

Posted
Posted

Oh you lucky sod! I can't disconnect the map light panel from my roof to remove it, the wires are connected directly as opposed to a plug for some reason, made. Changing the bulbs nearly impossible

  • 2 weeks later...
METAL13 Mentor

METAL13

Posted
Posted

to get at the bulbs, jam a thin but strong knife down the side of the button / plastic where the light shines from and it should pop out with a lil force :)

  • 1 year later...
mishmash32 Advancing

mishmash32

Posted
Posted

does anyone remember the colour of these wires, and whether or not they run down the passenger/driver's kickpanel? much appreciated!

  • 2 weeks later...
rackz Progessing

rackz

Posted
Posted

Hi guys.

Ive been doing some research around trying to remove the map light console (the whole bit where the map lights are above the rear view mirror). Ive looked every where and cant seem to find any guides.

I was going to try and see if I can pop it out with a screwdriver but I don't want to damage the roof lining.

Its a really long story but as I was upgrading my map lights to led's the little switch inside actually came loose and was floating around in my roof lining.... I was not impressed. So I need to put that switch back in.

Any help would be greatly appreciated.

Cheers..

i find a butter knife is less damaging the s screw driver.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      Query about the correct rotors for 2006 ACV40 Camry.

      I did a Google search. RDA 8112 suits your vehicle: TOYOTA CAMRY ACV40R 2.4L 2AZ-FE DOHC 16v MPFI 4cyl 117kW 5sp Auto 4dr Sedan FWD [06/06 – 09/11] TOYOTA CAMRY ACV40R 2.4L 2AZ-FE DOHC 16v MPFI 4cyl 117kW 5sp Man 4dr Sedan FWD [06/06 – 09/11] RDA 8112 Specifications: Specifications: Centre Hole Diameter: 62mm Flange Diameter: 62mm Minimum Thickness: 25mm Type: Vented Height: 49.2mm Diameter: 296mm Item Type: Disc Brake Rotor Material Type: Cast Iron Thickness: 28mm Pack Qty: Pair Stud Holes: 5 Position: Front RDA7686 RDA Brake Rotor 296mm x 26 Min (151mm Outer Hat Dia) Type DISC BRAKE ROTOR Brand RDA BRAKES Unit of Measure EACH Description RDA Brake Rotor 296mm x 26 Min (151mm Outer Hat Dia) Warranty 12 Months 20000kms Centre Hole Diameter 62mm Minimum Thickness 26mm Type Vented Note 151mm Outer Hat Diameter | (Use RDA8112 for 155mm) Height 50mm Diameter 296mm Item Type Disc Brake Rotor Thickness 28mm Number of Stud Holes 5 Position Front Brake Disc Type Vented Brake Disc Thickness 28 Centering Diameter 62
      campbeam in Camry Club
    2. 0

      Tyre Sale Specials

      I have been waiting and hoping for this Black Friday sale special to appear for 2024. 50% off all Pirelli Tyres. Main qualifying sale condition is: "Offer Tyres must be booked on Friday 29 November 2024 and be fitted between Monday 6 January 2025 and Saturday 15 February 2025." https://www.mycar.com.au/blackfriday?gad_source=1&gclid=Cj0KCQiAuou6BhDhARIsAIfgrn6ZbAnmv-FBFyT5UjZ5s9kCnKFSoMQLrVk3KXff7IqWPqq56qzU7oMaAr-eEALw_wcB&gclsrc=aw.ds
      campbeam in Club Lounge
    3. 10

      Android auto

      OK. Does any of Toyota's advertising material mention Android Auto? If so then kick up a stink, with Toyota management, about misrepresentation and false advertising, reminding them of the hefty fines. Herb
      ozieagle in RAV4 Club
    4. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    5. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    6. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    7. 1

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    8. 10

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    9. 10

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    10. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
×
×
  • Create New...

Forums

News

Membership