Glove Box Removal

[nicka_99]

Hi guys,

I was wondering if anyone knew where i could find a guide to remove the glove box

Cheers

[RollaRollin]

Have a flick through the back of your manual mate.

If you can't find it, pretty sure you just undo a phillips screw on the left hand side and then push both sides of the glove box down and it will come right out.

[DJKOR]

Open the glove box and you will find three Philips head screws along the top (like where the top of the box that opens out touches). Then go down into the foot well and remove the plastic kick panel there )you will need to remove your door sill to make this easier). You will then see a 10mm bolt holding the glove box compartment in and a screw with a 10mm hex head on the exact opposite side. Remove these and your entire glove box assembly is complete to remove. You can get an idea of where the screws are etc from the diagram attached. Just picture it reversed:

If you just want to drop down the box that swings open so you can access the panel filter, have a look in the owners manual because you will find exactly what you need there. Basically you disengage the air-shock on the left side, push the back of the glove box unit with one hand, and pull on the centre of the glove box itself with the other.

[nicka_99]

thanks guys much appreciated