Half aurion half Camry

[fivese7en]

It's a camry with an aurion front 100%. I almost bought that car but got sold before I could go see it!

You'd be crazy enough to convert your car to a single exhaust ;)

Edited October 30, 2012 by fivese7en

[Aiden Firth]

i know this is off topic but is the american camry the same body as the aurion?

just like the camry is the same as a aurion over here

[bigVAN]

i know this is off topic but is the american camry the same body as the aurion?

just like the camry is the same as a aurion over here

the american camry has the same shape as the gen6 camry , with a v6 under the hood.

the aurion is the australiasian camry v6 equivalent

[Aiden Firth]

i know this is off topic but is the american camry the same body as the aurion?

just like the camry is the same as a aurion over here

the american camry has the same shape as the gen6 camry , with a v6 under the hood.

the aurion is the australiasian camry v6 equivalent

as in the suspension setup?

[bigVAN]

i know this is off topic but is the american camry the same body as the aurion?

just like the camry is the same as a aurion over here

the american camry has the same shape as the gen6 camry , with a v6 under the hood.

the aurion is the australiasian camry v6 equivalent

as in the suspension setup?

i would say the US v6 camry and Aurions have the same susspension setup.

[fivese7en]

I know the camry sportivo here and in the US have different suspensions. Not sure about the stock models though - might be different or the same as BigVan said.

[bigVAN]

keep in mind the v6 gen6 camry is heavier than the 4cylinder we have here.

that is why i said the aurions "should" have the same suspension as the US v6 camrys,

because the aurion is technically the same as the gen6 v6 US camry , only difference is shape/design/concept and driver side.

[Guest]

http://www.toyota.co...-and-suspension

... the aurion has suspension tuned for 'Australian' conditions... one would then think its different to the us camry suspension.

[trentmeyer23]

That being said the components should all be interchangeable due to the same/similar chassis being used.