Jump to content


Bokips long slow facelift zre ascent build


Bokip

Recommended Posts

Hey everyone!

Well about a week ago I picked up a 2011 corolla ascent from the auctions.

The car came with no parcel shelf or floor mats, also the left side thing in the boot wherethere is a pin to hold the parcel shelf was broken. So I guess to start this build thread I went down to Toyota wreckers and picked up the missing parts and a new left side boot thingy. Should be nice and simple, no. Took me about an hour to the all the right floor mats and a parcel shelf that fitted properly. The guy tried to sell me 2 passenger floor mats and 2 what I assume to be 2 sedan mats for the back. Well anyways I ended up with the right mats and parcel shelf and about 10minutes I had switched outthe broken left boot part for the unbroken one. Next up, I was wondering if anyone knows of or heard of led taillights for the facelift zre c

orolla, I've seen some for the pre facelift. Are these the only one available? Also absolutely dreaming but would reckon a set of bbs would go awesome with the Rolla. But yeah on my broke as uni budget bbs are going to take a while. Ha ha ha. Also looking to get tinted. Def get tinted. Hate the clear windows. Also gave her a good wash. Noticed there are a lot of micro scratches, any tips on waxing them out? Products, techniques? The car was an ex rental from qld so shrewd in a little bit of a bad hair day,as the paint is still really good and interior is great. Car has a little high kms for its age but with a little selective driving I think I can even out the kms to year ratio. Lol who am I kidding, my first car I'm going everywhere with it. Gone are the days of being an over qualified pedestrian. Ha ha ha. But yeah the 2 thing I'm aiming to get done as for now is tints and led taillights if that is possible. Tints I know a guy so should be sweet,but I have googled about led lights and havent anything for post facelift, unless they fit all the same. Also will be getting rid of the badging on the back. Do you just rip those things off or is there a technical way to do it. Lol I'm writing an essay so ill stop here.

Edited by Bokip
Link to comment
Share on other sites

  • 5 weeks later...

An update, its been ages, did 2 things to the Rolla, debadged the back and installed hid's. The left bulb will come on then turn off allmost immediately, if I turn the lights off then on again, sometimes it will fix it, other times it will take a few goes. Going to switch the bulbs to see if it the bulbs, got the kit from auto platonium. Amazingly fast delivery, next day actually. will post pictures soon. Anyways that's all for now. Looking into getting some rims. Am think dark coloured rims against the silver will look good. Seen the most amazing colour. Carbon bronze pearl, weird and stupidly noon question but do people get their rims painted pearl, I've never heard of this happening before. Share thoughts comments and criticism alike, all welcome. Also just found another thread that states, aftermsrket hids are illegal. o.O

Link to comment
Share on other sites

An update, its been ages, did 2 things to the Rolla, debadged the back and installed hid's. The left bulb will come on then turn off allmost immediately, if I turn the lights off then on again, sometimes it will fix it, other times it will take a few goes. Going to switch the bulbs to see if it the bulbs, got the kit from auto platonium. Amazingly fast delivery, next day actually. will post pictures soon. Anyways that's all for now. Looking into getting some rims. Am think dark coloured rims against the silver will look good. Seen the most amazing colour. Carbon bronze pearl, weird and stupidly noon question but do people get their rims painted pearl, I've never heard of this happening before. Share thoughts comments and criticism alike, all welcome. Also just found another thread that states, aftermsrket hids are illegal. o.O

Show some us pics yo !

and yes aftermarket HIDs are illegal. Needs to have an auto levelling device and and squirters.

Link to comment
Share on other sites


Its fine as long as you adjust them and then lower your car so you dont blind people, like me or that bloke in an MX5... or any police officer... and then you face more problems :P

Edited by 4ABHGE
Link to comment
Share on other sites

at long last photos!!!!!

when i first got her unregistered

badge delete

hid installed

have a set of rota t2r that i can get for cheap, size is 18 x 9.5 +38, 5x 114.3

went onto the wheel offset calculator, it says, assuming that the original offset on the ascent is +45 that the new wheels will extend 51 mm out and there will be 37mm less for inner clearance, im not sure but those numbers to me look like they mean trouble and the wheels wont fit, anyone with more knowledge able to help me out? thanks, next mods to come wheels, tint, lowered and then break for fund accumulation then intense sq sound system build. stay tuned.

post-30835-0-12210400-1356650907_thumb.j

post-30835-0-96406400-1356651390_thumb.j

post-30835-0-67763700-1356651404_thumb.j

Link to comment
Share on other sites

  • 3 weeks later...

New exciting stuff happening, at long last.

Car will be recieving 20% tints all round shortly, am aware that 35 is legal.

am looking at a set of bbs copy rims and have some questions.

1. would 18x 9.5 +30 fit on the back, i calculated for 38 in previous post but no one has gotten back to me as to whether i have done the math right, i was looking to get them staggered so it would be 18x 8 +30 up front and 18x 9.5 +30 up back. also another question, it would be a fair while between getting the rims and getting the coilovers, for the sake of not having a ridicolous looking car for ages would it be a better idea to get the coilovers first and then rims or rims then coilovers?

Thanks for any help, comments, critisisms, all welcome.

Link to comment
Share on other sites

Definitely get coils first. Regarding wheels, I had 9" with +20 offset all round hahah fit snug!! The 9.5" +30 will sit further in, so the only issue might be inner clearance (might hit the suspension?)

http://www.willtheyfit.com/index.php?width=215&aspect=40&diameter=17&wheelwidth=9&offset=20&width2=225&aspect2=30&diameter2=18&wheelwidth2=9.5&offset2=35&Submit=Submit

I can't remember how close mine sit to the shocl though.. Ask GTLOST on the forums, he has my wheels now :)

Link to comment
Share on other sites

okay done, will be looking to get lowered on stock steelies first then rims.

@ye34ok, i remembered that someone had 9" wheels but i couldnt for the life of me remember where i had seen it. i will definetly give gtlost a message despite his screen name. ha ha ha

@ juvenile, thanks man, but to be honest i have no idea how those numbers translate to the real world, as in, id assume 53mm further out would mean that the wheels would stick out of the guards and thats bad, well for some that would be good, but 23mm less inner clearance doesnt seem as extreme as 37mm less as with the rotas.

Anywho thanks for the input guys, will hopefuly bring the car to get tinted in the coming days. now on the hunt for coilovers, as many have said lowered springs is very much a middle step to coilovers.

Link to comment
Share on other sites

Definitely go coils first. I'd say if I had to do it again now, I would definitely skip the lowered springs and go straight to coils. :lol:

After that, it's your preference whether to go wheels or go bars etc

I had 20% tint as well and I believed it was perfect. Not too dark (as people think) and not light as 35%. :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...

Forums


News


Membership