Caldina ST215W Brakes + EBC

[mcstevo]

I'm looking to up rate the brakes but not finding much out there thats not ridiculously priced so my idea is to put Celica gt4 turbo hubs and calipers on to my struts, can any one tell me if this is a straight swap or not the hubs thats is?

Any other tips would be greatly appreciated especially an easy to follow guide of how to plumb in a Greddy 2 EBC?

Cheers

Steve

[robmac1]

I'm looking to up rate the brakes but not finding much out there thats not ridiculously priced so my idea is to put Celica gt4 turbo hubs and calipers on to my struts, can any one tell me if this is a straight swap or not the hubs thats is?

Any other tips would be greatly appreciated especially an easy to follow guide of how to plumb in a Greddy 2 EBC?

Cheers

Steve

Enter your Caldina serial number here: http://www.toyodiy.com/parts/q.html

The model will be determined and a list of parts and images become available.

Look up the brake section and determine the part numbers of the discs and calipers and note them down.

Then go to here: http://www.toyodiy.com/parts/xref

Enter the part numbers and you will be given a list of vehicles where the same part is used.

This may help in finding green stuff pads at a good price because you will know what models the pads will fit.

As to interchangeability , I have no idea.

Good luck.

Edited May 7, 2013 by robmac1

[mcstevo]

thank you very much Rob, thats a great tool to get info with, took a bit of digging but i can now see Celica gt4 hubs are a different design to my GTT ones, you saved me a few hundred bucks bud, nice!

Cheers

Steve