Custom tune

[tsr]

overheating is a major concern with all aftermarket piggyback ecu's for all cars =)

good to see some serious work being done =)

im looking at getting a PP SMT-6 for fuel and ignition mapping myself. hopefully SOME workshop in South Australia will be able to assist with tuning. or at least cheap dyno time as there is no real sutable long enough roads here for a street tune.

toyotas standard tuning allows for quite a lot of timing advance and plenty of leaning out of the a/f ratio... just gotta run premium =)

Edited January 22, 2006 by tsr

[perthcamry]

Just to update you I have had my chip changed to a Haltec as the Toyota timing is not friendly to the other chip. It has not been tuned but is all wired up and ready to go.

[perthcamry]

Dyno Tuning on Tuesday :P

[perthcamry]

Ok here is the graph of the tune. As its auto it does not show below 3000 rpm

Ok here is the graph of the tune. As its auto it does not show below 3000 rpm

ummm try again

[Mitsiman]

And how does it drive with the new tune? Feedback...... :D

For anyone else interested, RPW can do this on any perth vehicle now with any mods and has the optino of further tuning with duel mapping for different fuels, and additional controllers if you are doing some very serious mods.

[perthcamry]

come on graph attach

[leasaunce]

Thats the result from "PERTHCAMRY"

POWER: 132WHP (98approx. KW @ wheels) NOT BAD FOR A 4CYC CAMRY

TORQUE: 168

Edited March 1, 2006 by leasaunce

[vleett]

come on graph attach

It's really interesting what you have done with the camry!

I own a Gen 4 Camry 2.2 auto and I'm looking for more grunt in the engine as well. Would be interesting to see how much more willing and eager the 5SFE engine can be made to be.

I am not too sure what can be done to the engine yet as I have to settle the suspension works first.

Right now, it's only mod is a K&N panel filter in the stock box...

[STYLSH]

hmmm that is very close to V6 power there. Just a little less torque. Good work =)

Now i just need to find some money and a shop that will do something like that

Edited August 17, 2006 by Un4given

[perthcamry]

Umm the power varies with fuel and other factor x's it seems but its fairly quick for a big girl and 10L avg /100k in mainly city work

[trd]

how much did you paid for the new chip? any info for the new chip? are wires fit the camry? as i know, very few chips would fit the toyota camry and rolla. how much is the chips? would you organise other gathering? do you have rpw website?

TRD

[perthcamry]

I think its about $1500 - $2000 with tune and Haltec chip. As the wiring was worked out bit by bit it cost me a lot more. RPW has the info now so you could call them.

http://www.rpw.com.au/

[Mitsiman]

$1450.00 supplied, fitted and tuned for a Haltech Interceptor package from RPW In perth. I can't comment on prices in other states of australia