New Head Unit for 2007 Aurion

[Alfred Q]

Hi Guys!

I finally decided to replace my old Chinese replacement HU with a new Chinese HU!

The old one worked great but it was about 4 years old and had some problems.

I bought this unit (Hope the link works)

http://www.ebay.com/itm/251236906749?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3

Everything is working and looking good except the reversing camera. The new unit uses a can bus harness (which does not fit anywhere in the Aurion) one is can rx (pink wire) the other is can tx (blue wire)

I assume these are the one who tell the unit when the camera is powered on BUT I was wondering if there is somebody who experienced this already and what the best course of action would be. i.e a harness adapter? direct wiring (but where?)....

The harness that is "empty" but does not fit is behind the original unit and has 2 wires one red with silver dots and one white with silver stripe.

I assume the red one is parking 12 V+ and the white one -?

besides the can bus harness coming from the unit I earthed the pink wire to the case as per previous installation and I also have a brown "Reverse" wire ....I assume that needs to be earthed as well?

Unfortunately this unit did not come with a wiring guide or a manual so I am just trying to see if someone has seen this before!

Thank you and all the best

Alfred

PS. I did search the forum but can bus rx/tx did not bring anything up!

God bless.............