Jump to content


EASIEST WAY OF CHANGING A THROTTLE CABLE SXV10 WIDEBODY


975s-fe

Recommended Posts

1) Loosen the throttle cable adjusting nuts(the ones that attach to the throttle body) and disconnect the outer cable from the mounting bracket.

2) Rotate the throttle lever and disconnect the inner cable(via the slot in the cable guide).

3) Disconnect the throttle cable from the support brackets on the firewall.

4) Remove the retaining screws and remove the lower driver's side dash trim.

5) Pull back the rubber boot on the top of the pedal.

6) Disengage the retaining clip and remove the cable from the pedal.

7) Remove the bolts retaining the cable flange to the firewall and withdraw the cable from the engine compartment.

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 54

      Stout Owners

    2. 2

      Lost Yellow guiding lines on reversing camera screen

    3. 0

      New Member

    4. 199

      Current Oil Specials

    5. 1

      Advice Please

    6. 0

      Fortuners Transmission

    7. 199

      Current Oil Specials

    8. 1

      Advice Please

    9. 0

      A Greenskin

×
×
  • Create New...

Forums


News


Membership