Jump to content


Recommended Posts

Posted

Hi guys,

I have a problem with my car and I cant find a solution for it.

Before, when I lock the car, the indicators usually flash once to let me know the car is locked; and flash twice with a sound when I unlock the car. Now, after I took it to the Toyota dealer a month or 2, the indicators do not flash when I lock the car anymore. However, they still flash twice when the car is unlocked.

I have done a bit of research and some said it may be the bonnet, or boot, or doors arent closed properly. I have checked everything and I cant seem to find what is the problem. My friend said it may be disabled by the Toyota dealer for some reasons but I am not sure if that was the case.

Is there anyone have the same issue - thanks :)

  • 7 months later...
Posted

Asumming yours is the 50 series, I'd just check the settings through the head unit first.

should be settings, vehicle, door lock, then check the options that you want.

if they are all set correctly for the lights to flash then I would check the vehicle is actually locking.

the vehicle won't lock if there is a door ajar, or if it thinks the door is ajar. Which bring me to a question.

does it beep twice to unlock, once to lock and continuiosly when the door is ajar/open?

another option could be that a setting was changed while it was at the dealership while plugged into the computer.

so if you can't activate it through the head unit then you may need to take it to the dealer.

i believe it is just a setting that has been changed, but I could be wrong.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership