Mag wheel upgrade

[Matty_SA]

Hi all,

Literally second post here, I am wanting to upgrade my 2006 Corolla's wheels to some nice rims, but I need some technical advice about the new rims and the spigots etc.  The details of the car I have are these:

195/60R15 88V     6Jx15 ET45     4x100

______________________________________________________

The Rims i'm looking at have the following specs:

Rim Size	15 inches
Rim Width	7J
Offset	35mm

Bolt Pattern & Color Options

ADV-1 ( 5111 )
A) 15X7JJ 4X100 ET35 CB73.1 BLACK / MACHINE FACE

_______________________________________________________

I have been advised that my 6 inch tyres will be fine on the 7inch rims, but I understand I need spigots for the offset.

I am blaze' about rims at this point, is someone able to point me to a set of spigots that will fit these rims so they will fit my car?

Any help would be greatly appreciated and thank you in advance.

Cheers

 

[Squalled]

I've not run spigots on my car, although my offset isn't as low at the wheels you've noted.

I've seen plenty of guys run quite low offsets, one of which is running 15x8 +0 on his Corolla and I don't believe he's ever used spigots.

[Matty_SA]

2 hours ago, Squalled said:

I've not run spigots on my car, although my offset isn't as low at the wheels you've noted.

I've seen plenty of guys run quite low offsets, one of which is running 15x8 +0 on his Corolla and I don't believe he's ever used spigots.

Ok good to know thanks again bro, greatly appreciate for your help!

[Hiro]

By spigots I assume you mean hub-centric rings (which has to do with the centre-bore size, nothing to do with offset), in which case either go to your local tyre shop or eBay and buy the right size (73.1 OD / 54.1 ID), you can get them either in alloy or nylon (I prefer alloy but they are obviously more expensive)

[Matty_SA]

Thanks Hiro I did buy those ones and in Aluminum thank you for your help 🙂