Jump to content


oil coolers/ front bar


6800rpm

Recommended Posts

gday guys, ive been reading about oil coolers and the opperating temps that engines should be running at. i came to the conclusion that maybe i need a small oil cooler, i did some research and found an adaptor plate to fit between my oil filter and block.

will i have low oil prssure? or does it all presurise being a thick fluid?

is it my oil pump that moves the oil through the filter?

also i require a new front bar, my indicators are installed in it is their anywhere that i can get a basic one with abit more air flow, i dont wont to make a statment with it just to replace it with something clean and tidy.

thanks guys for your help

Link to comment
Share on other sites

I'm using a stock oil cooler off of a 300zx TT, cheap as and does the job well. Don't know if I lost any pressure from it since I put the pressure gauge in at the same time as the cooler setup. If you do install a cooler don't waste your time or money on a tube and fin (aka serpentine) cooler, they do nothing. Get a plate and fin FTW :toast:

Link to comment
Share on other sites

Yeah, put it in myself along with a temp gauge. Only problem with the 300z cooler is your pretty much stuck with using those rubber oil lines. Since I like SBR, I'm using Pirtek oil lines which have done well so far. I'll be picking up braided lines when I overhaul it next year, along with a new cooler.

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      2013 cruiser gxl ute

    2. 2

      Buying 3rd hand 2010 Aurion Sportvio for $9000

    3. 1

      KUN26R Hilux Single Cab - Tray to Tub

    4. 1

      Removing low beam bulb 2014 Camry

    5. 1

      help with clutch

    6. 3

      newbie from Queensland

    7. 1

      High mileage camry

    8. 0

      1981 Hiace ignition upgrade

    9. 2

      Buying 3rd hand 2010 Aurion Sportvio for $9000

    10. 1

      Removing low beam bulb 2014 Camry

×
×
  • Create New...

Forums


News


Membership