HOWTO: remove front bumper part1

[JIN]

Hi guys.

I just want to show you how to remove front bumper for whatever you wnat to do under bonnet. :)

If you already know please ignore this thread.

Also this is only for reference and tips only.

I am not responsible for any risk of damage or accident during removing front bumper.

I tried to explain as much as I can with pictures but if you have any questions don't hesitate to ask me.

I am not gonna bite you. :P

I hope this helps you guys.

click pics to enlarge

1. remove clip and screw from wheel house.

When you remove the clip don't pull it too hard and if it is stuck and does not come out twist 90 degrees and pull again.

You may have to twist twice or so.

2. remove the plastic cover from bonnet.

remove the 7 clips from the cover and take the cover off.

You have to push the middle of buttons till you can hear tick sound and pull the whole clips off.

The clips look like this.

and here are all the clip spots.

3. remove clips and 2 screws from grill.

The clip in the pic below is different type of clip.

Pull the top part as much as you can and then pull the whole clip off.

Remove the screw and small push and pull clip on both side.

Continued in part 2...

Edited due to image uploading website problem.

Edited July 23, 2008 by JIN

[JIN]

Tried to post in one thread but it looks like this forum is under policy of limited pictures in one thread.

So I separated in two threads. :D

[private number]

Hey mate, good thread. im gonna tackle this tonight.

For future reference for everyone who needs to do this, this is the link to part 2 :)

http://au.toyotaownersclub.com/forums/inde...c=16527&hl=

[DJKOR]

Hey mate, good thread. im gonna tackle this tonight.

For future reference for everyone who needs to do this, this is the link to part 2 :)

http://au.toyotaownersclub.com/forums/inde...c=16527&hl=

This would be more useful to you as well mate:

Camry Stuff: Gen 6 Service Manuals - Exterior.pdf

[private number]

Cheers DJ, appreciate that. :)