My current ride height is 545mm front and 555mm rear. If the exhaust bend piping didn't hit my torsion beam, I would have the left the ride height at 535mm front and 540mm rear. At this height, it clears most driveways if driven up/down on an angle. Once I get the exhaust pipeline bend fixed... I will drop the height back to 535mm F/ 540mm R. I have camber bolts set at -1.5 Tell me more about these camber bolts...? Do you have a problem with your tyres scrubbing I'm not sure how low mine is in mm but I had king super low springs on and ask to go 3/4 inch lower and now scrubbing badly even on the hardest setting bit am getting the guards rolled hope this fixes the problem