RelishGTP
-
Posts
162 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Gallery
Tutorials
News & Articles
Videos
Everything posted by RelishGTP
-
I don't know of too many condensers that are busted and hold gas pressure lol and obviously I'm not going to re-gas myself but thanks for the input
-
Hey guys just wondering if anyone here knows how difficult and roughly how long it takes to replace the condensor on a 1997 gen4 v6. Trying to see if I should get into it myself or if I'll need a shop to do it for me. Thanks for any info Cheers guys
-
Nice^^! Any other tips you have in doing this? Obviously might be a bit different between vehicles but it all helps! Thanks
-
Hmm I'm sure creative wiring could get it working if that's the case but good to know what I'm up for if I get a wheel. Thanks again!
-
So I guess I should ask lol Being that I have a crossover year gen4 I don't have airbags they weren't standard fit on the csi model back then so am I able to use an airbag wheel and just delete the clock spring ?
-
Ok thanks for the info guys I'll have a look into it.
-
Does anyone know if a 36 series steering wheel will fit a 20 series? Looking for a factory wheel with stereo controls that will suit. Thanks everyone
-
Nice, thanks Trent !
-
Should be on the front of the trans, you'll see a hard line connecting from the slave and another coming out that will go to the master
-
Hey just wondering if anyone on here knows if the mcv20 and mcv36 have the same clutch accumulator? Or if any one can snap me a couple of pics of a 36 series accumulator I'd be able to tell if it's the same as mine...TIA guys Cheers
-
Got it sorted and they do. Mods can delete or lock this whatever you need to do. Cheers
-
Hey there just wondering if anyone on here knows if the early gen4 v6s had clutch accumulators as part of the hydraulic system?
-
Depends what your wanting out of lowering ? I run 2 inch and only find trouble with the odd speed bump/driveway but I wouldn't recommend dropping it all without replacing the shocks with something stiffer than stock.
-
Right thanks for the info everyone
-
Fair enough, so once again out of curiosity what kind of gain would be expected with tuning? Honestly I'm not planning on really doing this because I'm sure it less than legal bit it's always good to know
-
Makes sense, just out of curiosity what kind of power gains are expected ?
-
Random question but why are you guys blocking of the egr to begin with?
-
Not much to write up on I'm afraid, we just got directed to the knock sensor pins which is all we where looking for at the time.
-
Hey thanks for the reply, we ended up figuring it out with some help from a friend but I'll have a look at the link for future reference anyway. Cheers man!
-
So as the title says I'm looking for a 97 4 port ecu wiring diagram for a manual 1mz, bit of a long shot but wondering if anyone has one or knows of where I can find one. Thanks guys
-
I had the exact same problem years back, turned out to be the headlight combo switch was burning out at the base where it connects into the stearing column causing shorts, cleaned it up an never happend again. Might be a good area to check out could be the same cause. Hope this helps
-
Yo Trent! Got all my gear from dad's place.... I have everything we need good to go....new fuel pump, spark plugs n leads, master cylinder, reservoir....everything lol...thanks to Adam and Dave. My nets down for now so I'll send you some pics of the parts on my PC when it's back up rather than frigging around with my phone. Also have the brake kit for the rear as well. Be in touch Thanks
-
Wicked, I can do that! I have everything it needs jus wanna get new sparks and wires and we're good to go
-
Where abouts are you these days?
-
Back in Byron area.
