Jump to content

11sec gassed Starlet.


-Harry-

Recommended Posts

This is my car.

specs;

5efe block and crank, 4efte head and sump, Mild head work, ported top of head to lower comp ratio, reground cams with 3mm more lift, stock valve gear and head bolts, CP 8.5:1 pistons, PAR 5e rods rated at 200hp per rod, ground crank, asl Bearings, 720cc injectors, walbro pump + Bosch 044 prototype inline pump, standard fuel rail and reg, Modifyed CAS and smoothed dizzy cap, 4x bocsh coils, 9mm leads, Swift GTi radiator, Zex 75hp shot of nitrous, 3" dump to 3" straight through exhaust, hi-flow cat and cheap ***** cannon, Autronic SM4 ecu + Autronic CDI Garret GT2540 turbo, Kyb shocks and king springs.

Had a phtoshoot for a magazine so we added a few ****y bits and some volks.

preview.JPG

preview2.JPG

dsc00125if3.jpg

My turbo, TD04l and ct9

3turbosld4.jpg

Got sick of busting engine mounts

rearmountbj0.jpg

Dry carbon bonnet. VERY light weight. Ugly though.

dsc00021zg0.jpg

Race doors painted with rattle cans

dsc00022qg3.jpg

Ran 11.7 @ 121mph...not bad.

dsc00025xi3.jpg

The dyno. Bottom line Is stock cams. Next one is 3mm lift cams. Next one up is stock cams with 55 shot nitrous. (this is what I did the 11.7 with), The next one up again is cams with 55 shot nitrous. Much more agressive. Im now making 300hp atw but no pics of the dyno sheet yet. Rev limiter is 7500rpm. will go higher but stock valve springs just makes valve bounce and the had is also lifting

dsc00047yd5.jpg

Well thats a quick montage' of the car. What you dont see is the past 2 years of hard work and many problems but its all been worth it.

Comments and questions welcome.

Cheers

Harry

Link to comment
Share on other sites


Nice.

Something tells me you'd know of a large muscular chap driving an R33 also...

I think you mean Martin with the Drag Me skyline. Yeh I know him. Last I heard he was sick of the auto and going back to manual.

Race doors painted with rattle cans

How do these differ to that of a Road door?

With $250 and a days work I got a full set of race panels. El cheapo inspired.

doorfulldn5.jpg

doorpaintry6.jpg

lexanhatchmz5.jpg

joshzy0.jpg

Thanks for the coments guys. I look forward to coming on one of your cruises. Im just about to respray the whole car so wont be for a while

Cheers

Harry

Link to comment
Share on other sites

dang... is that crazy or what...

haha performance wise it would line up but comfort wise.. i think i opt for bill's :P

HAHA I was actually checking his car out the otherday. Very impressive project. I doubt it would come close performance wise. Comfort though, give me the sportivo anyday. He looks like hes getting serious though, I wonder how long he'll keep the comforts? :D This is down to about 650kg now. 300hp atw and that weight is going to make for an interesting combo at jamboree this year

Ive just stripped the roof back to primer last night. No going back now, I have to paint it :unsure:

Link to comment
Share on other sites

Race doors painted with rattle cans

How do these differ to that of a Road door?

With $250 and a days work I got a full set of race panels. El cheapo inspired.

I was thinking about doing something similar, but would need to buy 4 doors. Or just take them off and have cellophane over the openings :lol:

Link to comment
Share on other sites

Race doors painted with rattle cans

How do these differ to that of a Road door?

With $250 and a days work I got a full set of race panels. El cheapo inspired.

I was thinking about doing something similar, but would need to buy 4 doors. Or just take them off and have cellophane over the openings :lol:

Do it! Ha ha ha.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...

Forums


News


Membership