Jump to content


Recommended Posts

Posted

Hi Guys...

About to spend money on suspension.. and jsut wanted to hear from anyone who has the following setup.

Kings Super Low rears, KYB Excel Gas Shocks + 215/45-17 rubber on a + 40 offset wheel

am i going to be scrubbing anywhere?

appreciate your help.

Posted
Hi Guys...

About to spend money on suspension.. and jsut wanted to hear from anyone who has the following setup.

Kings Super Low rears, KYB Excel Gas Shocks + 215/45-17 rubber on a + 40 offset wheel

am i going to be scrubbing anywhere?

appreciate your help.

I'm running the same rubber with coilovers with about the same drop dialled in as the KYB's. I'll check my wheel offset when i get home. I don't have any scrub issues at all.

It also depends on the damping and spring rates too.

Posted

i'm running on pedders low's which is the same drop as kings, and with the same offset and same size tyres as you, and have plenty of clearence.. even with a full load of adults no scrubing as of yet.

Posted
i'm running on pedders low's which is the same drop as kings, and with the same offset and same size tyres as you, and have plenty of clearence.. even with a full load of adults no scrubing as of yet.

Awesome mate thanks....

so what would say if you rears were dropped another 20 mm??? as per the Super lows?


Posted
i'm running on pedders low's which is the same drop as kings, and with the same offset and same size tyres as you, and have plenty of clearence.. even with a full load of adults no scrubing as of yet.

Awesome mate thanks....

so what would say if you rears were dropped another 20 mm??? as per the Super lows?

well KYB shocks are stiffer then standered shocks, (i'm still on standered shock atm), so i don't think you should have any problems.

i'm only on lows and i have heaps of room so another 20mm would sit nicely and still have room. i wish i got super lows at the back now too.

i remember SB telling me that he had super lows in his old sportivo and he only ever had it scrap once, and that was with a full load taking a corner at high speeds.

give it a try and if it dose scrap then get the gards rolled out. ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership