Jump to content

Help i need some parts

Sweeney_8874

By Sweeney_8874
in Celica Club

 Share

Recommended Posts

Sweeney_8874 Contributor

Sweeney_8874

Posted
Posted

Hey everyone, I need some parts for my new project car which is an ra28 celica. I picked it up for $300 dollars. If you have any parts for this model or an ra23 or maybe a ta22 please let me know. Here is a couple of pics of it after i stripped some of it down.

post-11672-1231457588_thumb.jpgpost-11672-1231457612_thumb.jpg

post-11672-1231457632_thumb.jpgpost-11672-1231457649_thumb.jpg

post-11672-1231457679_thumb.jpgpost-11672-1231457729_thumb.jpg


DANZZT231 Grand Master

DANZZT231

Posted
Posted

Are you going to restore or turn it into Retro?

Lately I'm into Retro and restorations, so I am keen to see how this project goes!

Good luck!

the_random_hero Grand Master

the_random_hero

Posted
Posted (edited)

If you're in Brisbane, I'll give you $1000 for it :)

EDIT: May or may not actually give you $1000 :P If you had all the panels there however...

Edited by the_random_hero

Sweeney_8874 Contributor

Sweeney_8874

Posted
  • Author
Posted
Anything in particular that your after

Well at the moment i am after a bonnet and the vent in between the window and the bonnet. Also the side vents. Thats bout it. I have bought most of the things off ebay lately

Sweeney_8874 Contributor

Sweeney_8874

Posted
  • Author
Posted
If you're in Brisbane, I'll give you $1000 for it :)

EDIT: May or may not actually give you $1000 :P If you had all the panels there however...

I have everything bar a good bonnet and some little bits and pieces

Mr ZR Collaborator

Mr ZR

Posted
Posted

hey sweeney, i have a mate that lives at strathpine who has buckets of ta22 engine parts an original twin carb setup panels parts bits and pieces, funny i was just talkin to him not even 2 days ago about what to do with all those parts. if you're interested give us a call i can pass a phone number on to you.

0424 343 478

jonno

Sweeney_8874 Contributor

Sweeney_8874

Posted
  • Author
Posted

These are the 4 main parts i need. Both front blinkers in chrome bumper bar, bonnet, front vent and side vents

post-11672-1231754201_thumb.jpg

post-11672-1231754221_thumb.jpg

post-11672-1231754480_thumb.jpg

Please let me know if you have any of these parts. Click on the pics to have a better look at them. Thanks heaps

  • 2 months later...
Sweeney_8874 Contributor

Sweeney_8874

Posted
  • Author
Posted

Come on guys. I havent got many parts to go. Just a bonnet, front vent covers in between the front winfow and the bonnet and steering wheel surrounds. Let me know :)

  • 2 weeks later...
Sweeney_8874 Contributor

Sweeney_8874

Posted
  • Author
Posted

Im nearly there. I jsut need the bonnet chrome and front vent in front of the window. I need some interior parts as well. I am not sure wot i need for on the hatch part so feel free to let me know wot u got there. If u have the part that connects into the dash that holds the cigarette lighter in that would be awesome. Anyway thats bout it.

Here is a couple of pics of my dads ra23 celica

post-11672-1238279836_thumb.jpg

post-11672-1238279861_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 8

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    2. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    3. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    4. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    5. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is now working with nice cold air BUT every now and then we can hear and feel a like a buzz for a few secounds and today while my sister took my I could her like a mild knock sound when stopped but goes away when driving. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
    6. 6

      My Toys & Collectables

      Friday the 13th added
      L4WL3SS in Club Lounge
    7. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
    8. 5

      High RPM Idle after the engine warm up.

      i have same problem, already changed throttle body, ecm modle, help pls
      moxabest in Inside and Out
    9. 0

      Tow bar

      Hi guys, Just bought my new Landcruiser Prado yesterday. What is the difference between Onroad Towner and Off road Towbar
      Kiru in Prado Club
    10. 3

      Disconnecting winch, lightbar and UHF

      Generally, yes. In the 60s, and earlier, there were cars with positive grounds, so I'm always a bit hesitant to say the negative wire. It is always the one that bolts to the body. Herb
      ozieagle in Landcruiser Club
×
×
  • Create New...

Forums

News

Membership