Jump to content


Putting standard box back on for warranty!! Help

Shaneo

By Shaneo
in Corolla / Corolla Sportivo Club

 Share

Recommended Posts

Shaneo Enthusiast

Shaneo

Posted
Posted

I had my cold air intake on.. i fuked my 3rd gear syncro.. now i put my standard airfilter back on, and its fukin up.. it wont rev past 3 grand.. and that yellow light came on (malfunction) ive tighted it over and over.. but with the advanced vaccum does it make a difference because i don't know where it plugs into etc...

I NEED YOUR HELP GUYS.. i need to take it bak to warranty so i can fix my gearbox and now i fuked it even more...!!!!

Please.. thanksss

Link to comment
Share on other sites
Hiro Grand Master

Hiro

Posted
Posted
I had my cold air intake on.. i fuked my 3rd gear syncro.. now i put my standard airfilter back on, and its fukin up.. it wont rev past 3 grand.. and that yellow light came on (malfunction) ive tighted it over and over.. but with the advanced vaccum does it make a difference because i don't know where it plugs into etc...

I NEED YOUR HELP GUYS.. i need to take it bak to warranty so i can fix my gearbox and now i fuked it even more...!!!!

Please.. thanksss

MAF sensor problem? Tried clearing the codes in the ECU?

This seems to happen a bit after people put in CAIs.

Link to comment
Share on other sites
Shaneo Enthusiast

Shaneo

Posted
  • Author
Posted

its in the right way and everything.. no airleaks that i can see.. does sound still mean and deep even though its got a standard air filter on it... how do u clear the codes in the ecu??

Link to comment
Share on other sites

Hiro Grand Master

Hiro

Posted
Posted
its in the right way and everything.. no airleaks that i can see.. does sound still mean and deep even though its got a standard air filter on it... how do u clear the codes in the ecu??

Generally you clear the codes by resetting the ECU. One way is to take the terminals off the battery for half an hour or so, another (on some cars) is to pull a particular fuse which allows you to keep your audio settings etc.

Someone with more knowledge of the ZZEs should be able to help you, or better yet do a search, it's been covered many times.

Link to comment
Share on other sites
Shaneo Enthusiast

Shaneo

Posted
  • Author
Posted

ok guys... bad news... i resent the ecu n that.. but still nothing.. it wont rev past 3 grand.. and the malfuntion light is still on..

PLEASE IF ANYONE HAS ANY IDEAS THROW THEM THIS WAY I WANT YOUR INPUT!!

would the vacuum advance make a difference because i havent plugged them all in.. but it didnt make a difference before dont know why it should now..

Thanks guys ur input is very much appreciated...

Link to comment
Share on other sites
Shaneo Enthusiast

Shaneo

Posted
  • Author
Posted

Anyone and everyone!! i fixed the problem..

if you have this problem..

it was the airflor sensor.. it was fine.. dunno how it blew or malfunctioned..

but somehow during the changing of intake pipes it stopped working.

i fitted my m8s airflow sensor and went back to normal..

Thanks for everyones help.. much appreciated..

Tc Shane

Link to comment
Share on other sites
SuperDave Grand Master

SuperDave

Posted
Posted
it was the airflor sensor.. it was fine.. dunno how it blew or malfunctioned..

but somehow during the changing of intake pipes it stopped working.

i fitted my m8s airflow sensor and went back to normal..

Need to handle the MAFS very carefully as they break easily and aren't cheap.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      Aftermarket Air Intake

      The camry/aurion NA ones fit fine with the TRD. The throttlebody is the same diameter etc. The main issue with them is the breather pipes are setup differently but that's not a big deal. I've not seen one designed specifically for the TRD(There are lotus ones but the engine is orientated differently). Some of the intakes designed for the NA version are as follows: -K&N: 69-8611TS -AEM: AEM 21-870C -AF Dynamic: 0715-TV-HS -HPS Shortram: 827-534 I designed and printed a MAF pipe and filter enclosure with an attachment to goto the stock air intake locations but never got around to create the pipe that connects the two together, If you have the ability to print in a high temp resistant material I can probably share my files. I personally use the AEM intake and it works and sounds well.
      Baxter190388 in Aurion / TRD Aurion Club
    2. 1

      Head Unit with Apple CarPlay

      Did you end up getting a head unit for the Rav4? I'm thinking of purchasing one from eBay for my 2015 Rav4.
      enforcer in RAV4 Club
    3. 0

      RZN169 Poor fuel economy and low/rough idle at cold start up

      Hi all, First time writter. Long term reader. I have a RZN169r 1999 Toyota Hilux 3rzfe Manual 4WD with 425,000KM. Which we have owned from 130,000KM. Since about the 400,000km mark (it had a new/used 138,000km engine only, installed at 385,000KMs) it has been using fuel and idiling rough. I'm getting 100kms less then usual. We would normally get 450-550kms per tank. Now getting 350km-400kms. Our long term mechanic of 20 years retired a few years ago and I have no one in my local area who knows these engines or who I trust. Any sugestions on who I can take my car to? I also have no faith in my local Toyota Dealer. I'm in Sydney NSW. Thank you in advance.
      Green992.7Lux in Hilux Club
    4. 0

      Any RA 60 owners?

      Hi all ,new member here. Just wanted to introduced myself and show off my new to me 1983 Celica 2.0 XT liftback. Got from the original lady owner who had it for 41 years! It's had 2 sets of seat covers on the front seats and when I removed them the seats are like new. I'm over the moon with it. I'm southside of Brisbane if anyone is local......
      Dean sansom in New Members Introductions
    5. 0

      Bluetooth stopped working

      My 2008 Toyota landcruiser 200 series head unit's bluetooth has stopped connecting to phones, has this happened to anyone else and if so, how do i fix it? Thanks
      tristanH in Landcruiser Club
    6. 0

      Purchasing 2014 Prado GXL - Requesting Inputs

      Hello, Thanks for reading my post. We're in the middle of the process of buying 2014 Prado GXL from a private buyer in Brisbane. It has 107K km on the odometer, we arranged an independent inspection and only noticeable issue came out of the inspection is presence of rust. Inspector said general wear (ageing) and rust to the components consistent with the age and mileage. I've attached some of the images(related to rust) from the inspection, please review and let me know if I should be concerned about any future issues or as the inspector mentioned is the rust presence is expected for a 10-year old Prado. Appreciate your help in advance. Thanks, VM
      miPrado in Prado Club
    7. 3

      3rd Gen (XU50) Kluger new aftermarket radio install

      Update, yes it does retain the reversing guide
      jc614 in Kluger Club
    8. 3

      3rd Gen (XU50) Kluger new aftermarket radio install

      Hi there sorry for the late response, The reverse guidelines are on the factory camera itself (the guidelines are turned off on the Pioneer unit as it doubled up over the factory camera lines) and if I remember correctly they still retain the angle prediction. Everything else (excluding DAB) works***. But instead of using DAB I've downloaded RadioApp which has all of the DAB stations on it and is accessible by Android Auto (not sure on Apple CarPlay though) so no biggie. I also used an adapter to retain the original GPS antenna, works flawlessly. *** EDIT *** The info on the instrument cluster may or may not show, depending on what interface you end up using. In my case I've lost the audio and navigation info on the centre screen and fuel economy/vehicle customisation screens from the factory head unit but I'm not fussed by it as there are other ways to access them on a Kluger. I think it's all retained if you use iDatalink Maestro and a compatible head unit (it will be marked as such) but besides that and DAB all other functions are still operable.
      jc614 in Kluger Club
    9. 1

      Corolla Seca For Sale

      Where is this located? And is it manual?
      Lukeypookie in Corolla / Corolla Sportivo Club
    10. 2

      Removing low beam bulb 2014 Camry

      Thanks, Mate - i'll give it a go. As you say, $15 is better than replacing a damaged headlight (not to mention the aggravation).
      Markamry in Hybrid Camry
×
×
  • Create New...

Forums

News

Membership