Jump to content

wheel repairer

Brad-dreama

By Brad-dreama
in Wheels & Tyres

 Share

Recommended Posts

Brad-dreama Veteran

Brad-dreama

Posted
Posted

friend is in need of a repairer.

does anyone know the cost or the process?

its his stock wheels that have been scrapped a fair bit.

should he just buy new wheels?


SamO Collaborator

SamO

Posted
Posted

There are alot of good wheel repairers out there. I got 2 of my sportivo rims repaired at $45 a rim for gutter rashes which were roughly 4cm long. I got them repaired at Magman in punchbowl. Depending on your mates damage, if its only a gutter rash its much cheaper to get it repaired.

Brad-dreama Veteran

Brad-dreama

Posted
  • Author
Posted

aweome. i know alot of you guys live out west a bit.

but does anyone know any on this side of the bridge? ( manly mosman brookvale chatswood maybe??)

leasaunce Grand Master

leasaunce

Posted
Posted
aweome. i know alot of you guys live out west a bit.

but does anyone know any on this side of the bridge? ( manly mosman brookvale chatswood maybe??)

There's one in Thornleigh. Pioneer Avenue. don't know the business number, but they're the only one there anyway. Got 2 of my wheels fixed with them,


  • 4 weeks later...
corboy Advancing

corboy

Posted
Posted

i know one in lansvale he works from home,but i can't remember the address.but ask one of the wheel dealer in lansvale they have his bcard.

  • 1 month later...
  • 2 months later...
Gratchy_90 Advancing

Gratchy_90

Posted
Posted
aweome. i know alot of you guys live out west a bit.

but does anyone know any on this side of the bridge? ( manly mosman brookvale chatswood maybe??)

Hey, A great Wheel Repair Guy - Custom Wheels - Lansvale (Peter) Does an awesome job, good price 2

16 Ferry Road

JT3 Experienced

JT3

Posted
Posted

i got a quote today to respray, repolish and repair some damage to me wheels.

guy said to do that plus taking off and reinstalling tyres would be $140 each wheel.. which seems a bit much.

but guess if you love your wheels then its worth it in the end

VF-X Grand Master

VF-X

Posted
Posted

What u guys reckon the price for damaged lips from scrubbing the gutters? on 20s...

Any1 on the eastern sides?

  • 2 weeks later...
WERX Contributor

WERX

Posted
Posted

Jax in Mosman will do it, ask for jamie, he's OK, the others.........................

  • 3 weeks later...
DJKOR Grand Master

DJKOR

Posted
Posted

Sure they can:

duct-tape-3m.jpg

P.S. Is it me, or are those some mighty small slotted rotors?

vvti16v Mentor

vvti16v

Posted
Posted

hahah I copied the image from the HK news today....street racing went wrong.....this is a civic I think...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      Tyre Sale Specials

      Tried to search prices on mycar website & nothing would load Tyroola also has 15% off site wide. Some good prices depending what your looking for https://www.tyroola.com.au/
      L4WL3SS in Club Lounge
    2. 0

      overheated engine

      I drive a 2010 series 200 sahara V8 automatic. I recently towed a small caravan on a not that hotter day. The temperature gauge went to about half then dropped back to normal. The motor then went into limp mode and eventually stopped. On lifting the bonnet i noticed the top radiator tank had split all the way across. I have only two months ago had the complete cooling system checked with no defects. I called the RAA in South Aust and they tried to start it but just turned over but did not fire up. It was still pretty hot. I have been told the motor would be ruined by overheating. The car has been sitting at the repairers for 5 days now and as far as i know it has not been attempted to start. Before putting a new motor in it would it be worth putting a new radiator in it and see if it will fire up? Open to any suggestions at this stage.
      wayne m in Landcruiser Club
    3. 1

      1996 Trueno XZ - Is it worth modding?

      Depends on how common/rare they are in your part of the world. The XZ trim was the second-lowest so didn't come with most of the fun bits that the full-fruit BZG/V/R models did, so it's not anywhere near as desirable stock but sometimes you have to make do with what you can find, plus you shouldn't feel as guilty modding the heck out of it since most of it isn't special.
      Hiro in Classic Toyota
    4. 62

      VSC, Traction Control, Check Engine lights all on

      I attended Toyota Preston for Aurion ATX 2013 major service today. Cost $~$1300. On the way home I stopped to pick up dinner. Two fault lights: engine and VSC lights came on when I restarted the car. Car drove home just fine. I can only return the car tomorrow for them to sort out. Annoyed. Let’s see if they’re still on in the morning.
      57John in Aurion / TRD Aurion Club
    5. 1

      1996 Trueno XZ - Is it worth modding?

      Hi everyone, new member to the group and owner driver of a nifty little Toyota Sprinter Trueno XZ, now this was my cousins car, I bought it off him and after various drives, I have come to the decision that this needs alot of love. Now I am wondering if its worth putting my time and money into doing this certain make n model up or should I just buy a different car to do up? I am not very car-inclined so I really don't know a lot. Any opinions would be very helpful Thankful!
      Danimal in Classic Toyota
    6. 1

      Query about the correct rotors for 2006 ACV40 Camry.

      I did a Google search. RDA 8112 suits your vehicle: TOYOTA CAMRY ACV40R 2.4L 2AZ-FE DOHC 16v MPFI 4cyl 117kW 5sp Auto 4dr Sedan FWD [06/06 – 09/11] TOYOTA CAMRY ACV40R 2.4L 2AZ-FE DOHC 16v MPFI 4cyl 117kW 5sp Man 4dr Sedan FWD [06/06 – 09/11] RDA 8112 Specifications: Specifications: Centre Hole Diameter: 62mm Flange Diameter: 62mm Minimum Thickness: 25mm Type: Vented Height: 49.2mm Diameter: 296mm Item Type: Disc Brake Rotor Material Type: Cast Iron Thickness: 28mm Pack Qty: Pair Stud Holes: 5 Position: Front RDA7686 RDA Brake Rotor 296mm x 26 Min (151mm Outer Hat Dia) Type DISC BRAKE ROTOR Brand RDA BRAKES Unit of Measure EACH Description RDA Brake Rotor 296mm x 26 Min (151mm Outer Hat Dia) Warranty 12 Months 20000kms Centre Hole Diameter 62mm Minimum Thickness 26mm Type Vented Note 151mm Outer Hat Diameter | (Use RDA8112 for 155mm) Height 50mm Diameter 296mm Item Type Disc Brake Rotor Thickness 28mm Number of Stud Holes 5 Position Front Brake Disc Type Vented Brake Disc Thickness 28 Centering Diameter 62
      campbeam in Camry Club
    7. 1

      Tyre Sale Specials

      I have been waiting and hoping for this Black Friday sale special to appear for 2024. 50% off all Pirelli Tyres. Main qualifying sale condition is: "Offer Tyres must be booked on Friday 29 November 2024 and be fitted between Monday 6 January 2025 and Saturday 15 February 2025." https://www.mycar.com.au/blackfriday?gad_source=1&gclid=Cj0KCQiAuou6BhDhARIsAIfgrn6ZbAnmv-FBFyT5UjZ5s9kCnKFSoMQLrVk3KXff7IqWPqq56qzU7oMaAr-eEALw_wcB&gclsrc=aw.ds
      campbeam in Club Lounge
    8. 10

      Android auto

      OK. Does any of Toyota's advertising material mention Android Auto? If so then kick up a stink, with Toyota management, about misrepresentation and false advertising, reminding them of the hefty fines. Herb
      ozieagle in RAV4 Club
    9. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    10. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
×
×
  • Create New...

Forums

News

Membership