Jump to content


Recommended Posts

Posted

Hi guys, do you know if the front passenger seat can be removed?

Reason I ask is because I decided to let a drunk idiot into my car the other night and surprise surprise he stepped on a UDL can and burst it under the seat. I'd love to get in there with some carpet cleaner and give it a good clean before I leave the country for 3 weeks Friday.

Any help is greatly appreciated.

Thanks.

Adam.


Posted

Have u taken a look in ur car yet? Or u just asking first?

I havent looked myself but just from the top of my head, im gonna guess that ur gonna have to push the seat all the way back or forward, so that u will be able to access some bolts to unscrew from both ends and basically take ur seat out. But becareful aye, its a precious car haha :D

Posted

Thanks for your reply.

Nah I haven't had a look yet, but I will with that in mind. No more drunken idiots in my car. That's the new rule.

Posted

Does the yours have an electric passenger seat? If so, I imagine there would be wires to disconnect there somewhere?

I think all trim levels come with airbags built into the side of the seat back, so I would be careful with disconnecting any wires for your seats.


Posted

Nah mine's an SX6 so no electric passenger seats. I'm gonna take a really good look now at the seat and have a go at removing it.

Posted

I'd still disconnect the battery and be wary of airbags.

Posted

Yes. As said, MAKE SURE you disconnect your battery and wait at least 90 seconds before disconnecting the airbag connector (yellow one) under your seat.

Removing the seat is as simple as moving it forwards and undoing the two bolts at the rear and then moving it forward and removing the two bolts at the front. This is basically the same on all cars. Pretty basic to figure out.

Then while you are at the front (after undoing the front two bolts) tilt the seat back (as in so you can see underneath it), and then disconnect the airbag connector (after at least 90 seconds of disconnecting the battery).

Also, I'd lay an old towel or large rag over the door sills. If you aren't careful in removing your seat you will end up scratching your paint on the door sill. This is something I would recommend with the electric seats especially because they aren't that light.

  • 5 months later...
Posted

Rather than starting a new topic I thought I'd ask here. I've just fitted a new amplifier for my new speakers and want to do a test run before putting the car back together. My question is is it safe to unbolt the drivers seat and lean it back to have easy access under the seat with the car on so I can test the sound system and tweak the amp under the seat? I'm not removing the seat or disconnecting any cables just removing the 4 bolts and leaning it back. Thanks for any help.

Posted

Rather than starting a new topic I thought I'd ask here. I've just fitted a new amplifier for my new speakers and want to do a test run before putting the car back together. My question is is it safe to unbolt the drivers seat and lean it back to have easy access under the seat with the car on so I can test the sound system and tweak the amp under the seat? I'm not removing the seat or disconnecting any cables just removing the 4 bolts and leaning it back. Thanks for any help.

Just don't let the seat fall back. Otherwise you are going rip the wires out of the wiring harness.

Posted

Thanks very much Daryl. Knowing this will save me hours of messing around.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      2017 Diesel d4d toyata hiace limp mode

    2. 1

      Tyre Sale Specials

    3. 0

      overheated engine

    4. 1

      1996 Trueno XZ - Is it worth modding?

    5. 62

      VSC, Traction Control, Check Engine lights all on

    6. 1

      1996 Trueno XZ - Is it worth modding?

    7. 1

      Query about the correct rotors for 2006 ACV40 Camry.

    8. 1

      Tyre Sale Specials

    9. 10

      Android auto

    10. 0

      E160 Corolla fielder suspension

×
×
  • Create New...

Forums


News


Membership