Jump to content

steering wheel


seandarcher

Recommended Posts

Hi

I have a Toyota Hilux Single cab Ute 1988, I need to remove the steering wheel. I have removed the horn cover and there is a sinlge bolt which looks like it clamps the steering wheel to the steering column but after removing the bolt I'm unable to pull the steering wheel off. Where am I going wrong?

Link to comment
Share on other sites


Hi

I have a Toyota Hilux Single cab Ute 1988, I need to remove the steering wheel. I have removed the horn cover and there is a sinlge bolt which looks like it clamps the steering wheel to the steering column but after removing the bolt I'm unable to pull the steering wheel off. Where am I going wrong?

That is normal for most cars, the steering wheel is a tight fit over the shaft spline so are often difficult to remove even after the bolt is off. You can get a special steering wheel puller from most automotive stores, however my preferred method is to put the nut back on just a bit (to stop the steering wheel when it finally comes off) and pull the steering wheel off towards you, jiggling it as you do - I've found this works in 9 outta 10 cases.

Link to comment
Share on other sites

... however my preferred method is to put the nut back on just a bit (to stop the steering wheel when it finally comes off) and pull the steering wheel off towards you, jiggling it as you do - I've found this works in 9 outta 10 cases.

Yep. This is my preferred method as well. Grab it at the 3 and 6 9 o'clock position and start rocking it back and forward on each side pulling back with a little force. It should give way rather quickly. Except when I do it, I opt to go with no bolt. I like to take the chance :lol:

Link to comment
Share on other sites

... however my preferred method is to put the nut back on just a bit (to stop the steering wheel when it finally comes off) and pull the steering wheel off towards you, jiggling it as you do - I've found this works in 9 outta 10 cases.

Yep. This is my preferred method as well. Grab it at the 3 and 6 o'clock position and start rocking it back and forward on each side pulling back with a little force. It should give way rather quickly. Except when I do it, I opt to go with no bolt. I like to take the chance :lol:

you crazy man.

BTW don't you mean the 12 and 6 o'clock positions?

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 54

      Stout Owners

    2. 2

      Lost Yellow guiding lines on reversing camera screen

    3. 0

      New Member

    4. 199

      Current Oil Specials

    5. 1

      Advice Please

    6. 0

      Fortuners Transmission

    7. 199

      Current Oil Specials

    8. 1

      Advice Please

    9. 0

      A Greenskin

×
×
  • Create New...

Forums


News


Membership