2ZZ-GE radiator hose (top)

[ImPulse]

G'day all,

Cannot seem to find this information anywhere, does anyone know what size (diameter) the top hose of the 2ZZ ('04 sportivo) is?

The reason I ask is because I'm trying to fit an aftermarket Apex'i water temperature gauge, and due to their strange sizing of the temperature sensor (an M12 bolt size), I cannot find the splice adapter locally and have to buy this online (Apex'i brand itself).

At worse case I suppose i'd just take it off and measure it up then order it, but was hoping someone here could shed some light =]

Cheers in advance

Alf

[2zz corolla]

Hey alf

Did you manage to figure out what size the top radiator hose i am asumming its about 34mm, i am also trying to do some thing similar.

Cheers

Dave

EDIT looks like i have answered my own question 32 - 34 will do the job .

Edited August 6, 2011 by 2zz corolla

[lateralus]

or....

http://www.fensport.co.uk/Parts/Model_7/Category_5/2749

[2zz corolla]

or....

http://www.fensport.co.uk/Parts/Model_7/Category_5/2749

awsome find thanks!

[ImPulse]

Lol thanks guys, the APEXI gauges use a really weird sized temperature sensor thread.

May I ask how you found out that 32-34mm was the go?

Alf

EDIT looks like i have answered my own question 32 - 34 will do the job .

[2zz corolla]

Lol thanks guys, the APEXI gauges use a really weird sized temperature sensor thread.

May I ask how you found out that 32-34mm was the go?

Alf

EDIT looks like i have answered my own question 32 - 34 will do the job .

Did a search and found that members were using 32 and 34mm radiator hose atachments. i installed a 34mm one on my facelift stivo yesterday, it worked but would recomend to use 32 as 34 is a little too tight.

Dave

[ImPulse]

cheers man will order one 2mrw then :D

Alf

[SuperDave]

Lol thanks guys, the APEXI gauges use a really weird sized temperature sensor thread.

May I ask how you found out that 32-34mm was the go?

I supplied 32mm in my conversion harness kits