wash and wax step by step.

[TRD468]

How to get that perfect shine!

1. rinse your car off with clean water. Fill up your clean bucket with clean water and add meguiars gold class wash shampoo.

2. Use a micro fibre sponge and thoroughly wash the car from top to bottom to avoid swirls and scratches.

3. Rinse your car off with clean water.

4. Dry your car off with a micro fibre chamois.

5. Get out your meguiars quick clay detailing system and clay bar your whole car. remember to turn over your clay bar to avoid scratching the paint.

6. Dry off your detailing mist residue as you are going along, don't worry about getting the finish perfect as our next step is polishing.

7. If your car has got swirls get meguiars swirls X or scratch X to remove swirls and scratches. Apply with a foam pad in a circular motion panel by panel.

8. Allow the product to dry IN THE SHADE (never polish or wax in the sun) and then wipe off your residue with a micro fibre cloth.

9. Grab some meguiars next generation 2.0 wax liquid to protect the surface of your car. Apply with a foam pad in circular motions all over the car.

10. Once your product is dry wipe off with a microfibre cloth.

11. After that we finalise the whole process by polishing your car with meguiars wax cleaner (paste) apply with a foam pad in circular motions.

12. After the product is dry wipe off with your microfibre cloth. To get the best finish, get a rotary buffer and buff the car with a sheep wool pad. (only buff after your have wiped off the residue with a microfibre cloth)

13. Your car is now clean and super shinny !!!!

Check out mequiars USA videos on youtube to find out more info on how to do the wass and wax process. But the steps here is basically going to give you the best result.

Don't forget, when ever you see an imperfection, "buff it out !"

:D

Edited August 19, 2011 by toyota pride

[69.NIX]

Wash & Drying FTW