Jump to content


Recommended Posts

Posted

Hi, I am from U.S And I am wondering if 07 Aurion front and rear end conversion is possible for my 07 Camry LE (US verion)

And if so, Can some one please provide me with some sites or people that can sell me those parts.

Looking to buy parts for 07-10 Toyota Aurion:

Headlamps

Taillamps

Trunk lid (with trunk lights)

Rear and Front Bumpers.

Front Fender and Hood

FaceLift grille

TaKe a look at the pictures..Please Help!

post-28757-0-99505400-1338466956_thumb.j

post-28757-0-62343600-1338466981_thumb.j

post-28757-0-32985200-1338467031_thumb.j


Posted

I have everything you're asking about, except the front right fender and facelift grille. Unfortunately, unless you are in Australia, this won't help you.

Below is my old for sale post (some old comments removed & prices are from late 2009), to give you something to think about:

FS: [VIC] 2006-2009 Aurion (GSV40) Parts:

...

These parts have all been fitted at the factory, so can not be called new, but as the car has never been driven on the road (current mileage is still factory at 2.1km) the parts are in as-new condition.

Some fasteners can be supplied, please contact me for availabililty.

These parts have not been packaged, simply protected when stored. If it is marked (visible when installed) at pick-up, I will discount it.

Pick-up is best as many parts can not be posted due to their size and/or weight.

Paypal (before pick-up) or cash are preffered, but direct deposit (before pick-up) is also acceptable.

...

Exterior ...

Front Bumper, Grille & Crash Bar

Main Part Numbers: 52119-06933, 53112-06050, 53101-06130, 52021-06071

Production Range: 10/2006 - 08/2009

Asking Price: $350

frontbumper.jpg

Left Front Headlamp (with all globes)

Main Part Number: 81170-06341

Production Range: 10/2006 - 08/2009

Asking Price: $300

lfheadlamp.jpg

Right Front Headlamp (with all globes)

Main Part Number: 81130-06341

Production Range: 10/2006 - 08/2009

Asking Price: $300

rfheadlamp.jpg

Hood (2 person lift)

Main Part Number: 53301-06130, 53341-06200

Production Range: 10/2006 - 08/2009

Asking Price: $400

hoodd.jpg

Left Front Quarter Pannel

Main Part Number: 53802-06160

Production Range: 10/2006 - 08/2009

Asking Price: $150

lfquarterpanel.jpg

Left Front Door (with glass) & Rear View Morror (with globes)

Main Part Number: 67002-06130, 67112-06080, 68102-06130

Production Range: 10/2006 - 08/2009

Asking Price: $500

lfdoor.jpg

Right Rear View Morror (with globe)

Production Range: 10/2006 - 08/2009

Asking Price: $50

rfmorror.jpg

Boot Lid & Integrated Rear Lamps (with all globes)

Main Part Number: 64401-06390, 81591-06161, 81581-060161

Production Range: 10/2006 - 08/2009

Asking Price: $700

IMAGE COMING

Left Rear Combination Lamp (with all globes)

Main Part Number: 81561-06271

Production Range: 10/2006 - 08/2009

Asking Price: $200

IMAGE COMING

Right Rear Combination Lamp (with all globes)

Main Part Number: 81551-06271

Production Range: 10/2006 - 08/2009

Asking Price: $200

IMAGE COMING

Wheel Covers (set of 4)

Main Part Number: 42602-06040

Production Range: 10/2006 - 08/2009

Asking Price: $50

wheelcovers.jpg

Interior ...

Dash Pad & Passenger Airbag (colour to suit "INTERIOR 15" on B-pillar label)

Main Part Numbers: 55401-06151B0, 73960-06110

Dash Production Range: 09/2008 - 08/2009 (check with dealer for 10/2006 - 08/2008 suitability)

Airbag Production Range: 06/2006 - 08/2009

Asking Price: $1000

dashairbag.jpg

Drivers Airbag (colour to suit "INTERIOR 15" on B-pillar label)

Main Part Number: 45130-06310B0

Production Range: 10/2006 - 08/2009

Asking Price: $300

driversairbag.jpg

Future Parts for Sale ...

... additinoal parts available include A/C condenser, all brake rotors, all brake calipers, all brake pads, rear control arms, steering rack + pump ...

Posted

One thing to note since you're in the US, you'll need to source LHD export-spec Aurion (Middle East) headlights, or Taiwanese/ Chinese spec headlights. Aussie spec headlights will have the wrong beam pattern for LHD countries.

You can try calling up dealers on the Australian Toyota website or Aussie wrecking yards (Shipping all the way to the US might not be cheap though.). You might also want to try contacting members in the Taiwanese Camry/ Toyota Club or something (Being in Asia, parts might be cheaper.).

Posted (edited)

To: 450hp/tonne

That's Good, But are you sure that those parts are compatible with U.S Version of 07-09 Camry(in my case) LE?

Am I going to have to replace the front doors as well?

Also Do you have a Right Front Quarter Pannel? or just a left one?

Also to: ToyotaFreak Do you know any Asian toyota Aurion Forums? or Chinese Wrecking yards that I can get these parts from.

Please. Waiting for a reply. Thank You.

Edited by Russboy

Posted

That's Good, But are you sure that those parts are compatible with U.S Version of 07-09 Camry(in my case) LE?

No, I'm unsure. I posted to give you something to think about.

Am I going to have to replace the front doors as well?

They may not line up, I don't know, but if not then front doors would be needed. If front doors are different, then rears probably will be too. If they are different also, might need to cut out and replace the c-pillars too ... not sure how you'll get that answer.

Also Do you have a Right Front Quarter Pannel? or just a left one?

Right fender and door already gone.

Posted

I would imagine no one in Australia would have a need to convert their Camry front end to an Aurion front end so I think you aren't going to get answers about what would fit here.

Posted

I would imagine no one in Australia would have a need to convert their Camry front end to an Aurion front end so I think you aren't going to get answers about what would fit here.

What does Australian Camry Looks like?

Posted

What does Australian Camry Looks like?

Like the American one. My point being is that because both cars are available, one would not typically have to convert the Camry front end to an Aurion because you can simply buy an Aurion.

Posted

Well yeah, in America we have a regular/standart Ford mustang GT (FOR EXAMPLE) and we also have a Shelby GT500, but people still convert(the body style of) their Mustang GT into Shelby GT500 because of the huge price difference. And it is much cheaper to have a nice looking Mustang, and I primarely talking about the body of the car.

So with that said, I thought that in Australia people would do the same with a Camry and Aurion since the body look so much a like and shares the same Chassis.

I gues I was wrong. Sorry.

Posted

Converting a standard Mustang to look like a GT500 would be more alike to converting your Camry LE to a Camry SE. People here wouldn't convert their Camrys look like Aurions here because the price difference is such that by the time you paid for the parts, paint and labour to do the conversion, you could have spent similar money and just bought the Aurion.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...

Forums


News


Membership