Jump to content

Recommended Posts

Posted

Not sure about the 2015 models, but I believe the previous were around 16psi.

Posted

Boost on the 05-Current models is set at 15psi, which it will JUST hit for a brief moment under full throttle acceleration around 3.5k.

The factory turbo can be somewhat safely wound up to around 21psi when tuned without risking any damage to the turbocharger.


Posted

yes - and I know quite a bit about the performance side of them

  • 3 years later...
Posted (edited)

I have an ex mining stock hilux 2011 3.0 litre turbo diesel.  How much can I increase the boost and what is easiest/cheapest way?

 

Cheers

Edited by lahie malloh
  • 10 months later...
Posted
On 7/4/2015 at 12:25 PM, trentmeyer23 said:

Not sure about the 2015 models, but I believe the previous were around 16psi.

I have a question to ask. My dad's got an '09 3.0L. His had problems with the turbocharger lately, its been licking lots of oil from the pipe especially because of the fantastic pick up power from the turbo. I believe so it was pulling at around 16psi too, but he took his charger for service and they repaired the lick problem. Now, the other problem we discovered is that is that the car doesn't have the same pulling power like before, the pulling stops at around 2.7 rpm and the noise of the car is irritating as it goes on to 3000 rpm. I wanted to ask who can help us out to try and bring back the aggressiveness power that it used to have, what do we do, do we adjust the butterfly or...? 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership