Jump to content

Recommended Posts

Posted

Hey guys, I've just recently bought a 98 Camry and the original owner didn't have the remote to lock and unlock the vehicle. I've been looking around for a while to see if i can find one that will work with my vehicle, but so far have had no luck. I was also wondering if anyone knows where i would be able to get one, and maybe some instructions on how to program it. Thanks in advance :)

Posted

Jump on Youtube and have a look, there are heaps of different tutorials. As far as the remote goes, eBay will probably have something useful.

Posted

Step 1: Buy genuine Toyota remote on eBay from locksmith or dealer

Step 2: Follow instructions usually provided with said remote to pair it to your car

Step 3: ????

Step 4: Profit

Here's one I bought earlier

http://www.ebay.com.au/itm/251251370914

Posted

Thanks so much guys, I just bought the remote suggested from eBay. Hopefully it works :)


Posted

Turn the key from off to on 3 times in 5 seconds.

PROG should be displayed on the clocks

Press button on the remote and the hazards should flash

Repeat for next remote

Turn ignition off when finished and test remote

Posted

Turn the key from off to on 3 times in 5 seconds.

PROG should be displayed on the clocks

Press button on the remote and the hazards should flash

Repeat for next remote

Turn ignition off when finished and test remote

Sounds like the same procedure I used which worked

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership