-
Latest Postings
-
0
Cylinder head removal
1993 Toyota Corolla CSi Sedan I've had this car for about 10 years. During that time I've never really studied anything under the bonnet. I've been studying it very recently. I have to say I'm amazed at the plumbing and wiring attached to the engine. It makes me wonder what newer cars are like. I've only ever bought second-hand. Anyway, fully loaded, hot day, slow traffic, an up hill run (Brown Mountain, NSW), stop and go. The engine starts to make noises I'd rather it didn't make. Pull over let it cool. Eventually added some water but the engine didn't start. Leave it. Hitch a ride. Come back with another car and tow it. Annoyed with the thing and it sits idle for a few weeks. Back at, and it starts first go. I'm amazed. Drive it into a spot where I can work on it. A few months pass and I try to start it again. It wants to start - but no go. I get fed up trying. Then I'm shocked (but not surprised) to see, with the radiator full and the cap off that as I turn the engine over (it still won't start) huge amounts of water blowing out the radiator. It's a New Zealand Geyzer. And the engine isn't even running. At that point, I'm visualising a huge gap in the head gasket between one of the cylinders and the water jacket. The head has to come off. And I committed to doing that this weekend. I'm not enjoying this. Oh, it started as fun. I've removed heads before. Years ago. There's so much plumbing on this thing. I don't know what half of it is. Half the time I don't know if the plumbing are vacuum lines, water, or fuel. So many weird things on this engine. Werid to me, anyway. Plenty of pictures and notes taken, to help me put it back together again. I have to say that there are some aspects of this engine that make me feel that the designers should be shot, or at least strung up by the feet (like Django was in the movie) and beaten senseless. I removed the radiator - two bolts and it lifts out. Way to go. Good design. But most other things I found to be a pain. (For example, the thermostat housing seems to be attached to some other housing that has a water hose attached that runs along the back of the engine underneath the inlet manifold. I never knew it was there. It looks like it runs to the water pump. I don't know how anyone would gain access to that without removing the inlet manifold. What poor engine design.) So, here's the thing. If there's anyone out there who has experience with a 1993 model, give me a shout, and I'll put a few questions to you. -
2
1996 Caldina Fuel Pump Location
Walked away from the job last night came back this morning and found the location of the Fuel pump problem. Blocked return line and the OBD connection. Someone above must be looking over my shoulder Access to the fuel pump is via the left hand rear seat cushion (left it up) and the OBD connection is in the engine bay at on the left hand side wall. Pays to keep looking. -
-
2
1996 Caldina Fuel Pump Location
Can anyone describe where the OB2 Connection block is located on a right hand drive 1996 Caldina. I have looked under the drivers compartment side cover and through the fuse box area however I have not yet found the terminal box for the OBD monitor. -
10
04 Estima cruise control speed limited?
Hi guys how it's going? We have a 2004 Estima and we're trying to fit a cruise control. Unfortunately there is no factory plug and so we are using the factory connector for the assumed audio control and and jacking off the Top Left 1 and 3 pins. Does anyone know the correct pins for the Cruise Control? Photo below -
2
Radiator removal
Hi Pat - don't know if you'll see this after all this time. Nobody mentioned the engine, petrol/diesel. I'm hoping it's a petrol 2.4 like mine! Thanks. -
0
Current Drain
Hi, New member here so be gentle . I have a 2017 VX and since I've owned it has a problem with start battery draining within 2 days . I'm the second owner and it was always serviced by Toyota . I've replaced both start and secondary battery with brand new and problem still exists . Even taken to an auto electrician and he has spent hours trying to resolve this problem . He thinks it could possibly be in the Canbus system but he doesn't have the tools to test same . Anybody experienced this ? If so what is it and how to fix ? Cheers, Rick -
1
Completely lost on Head Unit Upgrade for Kluger Grande 2009
I also have a Grande from 2011 and I think the infotainment units are the same. I have thought about upgrading the unit from time to time as the maps are outdated but ultimately decided not to as there are lots to consider with the Grande head unit. If I had to choose one of your options, I would choose the Brummstadt model as it is at least designed for the Kluger but you need to factor in: - You may need to change your reverse camera as a lot of these units aren't compatible with your existing camera. - If you choose an non compatible model, you will lose all steering wheel button functions. (Personally I would find that annoying having 4/5 buttons on the steering wheel that do nothing after the install) - If you purchase online and have the device shipped over and have issues with the unit, imagine the hassle of removing the unit and shipping it back. - Be careful with removing the trim pieces in the car. Your car is 16 years old and the plastics would be brittle and may crack if too much pressure is applied. Personally although the head unit is old in my car, it still works and meets my needs 90% of the time. I use my phone if I ever need current maps and navigation. If I were you and not 100% confident in installing a head unit including running new wires through the car to replace the reverse camera, I would try to find a reputable place that did the whole install for you. Interesting video: (BTW, no I don't work for MPX 🙂 but if they had a shop in Perth I would probably ask them to do this exact install in my car)- 1
-
-
1
Completely lost on Head Unit Upgrade for Kluger Grande 2009
Hi All, dunno much about car upgrades so kinda feeling overwhemled by the choices of head units out there. Need to replace the head unit for my Kluger Grande with the latest Andriod auto head unit. Any suggestions? I want a large display and a fast processor is also very important to me. I found out these two models below so far but not sure if they are too expensive? Also what would be your preferred store in Aus to buy head units. https://www.joyingauto.com/newest-arrival-joying-10-1-double-din-car-head-unit-supports-ar-cameras.html https://www.brummstadt.com.au/products/toyota-kluger-2007-2013-premium-head-unit-upgrade-kit-radio-infotainment-system-with-wired-wireless-apple-carplay-and-android-auto-compatibility -
6
Camry Navigation System
Anyone got any update on this question? I asked my dealer about a navigation map update for my 2019 Camry a couple of months ago and they told me $240 for one update! Jeez, what is it - gold plated or something?😳 Us owners ought to be able to update our maps ourselves, it's not rocket science - anyone with basic computer skills would be able to do it. Sigh...🤨- hybrid
- navigation
- (and 1 more)
-
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now