Jump to content

Recommended Posts


Posted
if its really stuck on... Belt a Screwdriver through the side of the oil filter and use that to lever it off.... works a treat. Just remember to have rags handy.

the aurion uses a different type of oil filter... the casing is re-usable, so why you would damage that if you didnt absolutely have to is beyond me...

Posted
if its really stuck on... Belt a Screwdriver through the side of the oil filter and use that to lever it off.... works a treat. Just remember to have rags handy.

the aurion uses a different type of oil filter... the casing is re-usable, so why you would damage that if you didnt absolutely have to is beyond me...

Lol. I'd love to see someone manage to shove a screwdriver through the oil filter cap on the Aurion.

Speaking of which though, you if you plan on doing the oil change yourself, you're best obtaining a cap-style oil filter wrench like this: http://www.toolsource.com/toyota-filter-wr...m-p-100298.html


Posted
if its really stuck on... Belt a Screwdriver through the side of the oil filter and use that to lever it off.... works a treat. Just remember to have rags handy.

the aurion uses a different type of oil filter... the casing is re-usable, so why you would damage that if you didnt absolutely have to is beyond me...

Lol. I'd love to see someone manage to shove a screwdriver through the oil filter cap on the Aurion.

Speaking of which though, you if you plan on doing the oil change yourself, you're best obtaining a cap-style oil filter wrench like this: http://www.toolsource.com/toyota-filter-wr...m-p-100298.html

Thanks that is the part I looking for will order one alan

  • 1 month later...
Posted
Just found this..

ITs for the Camry 2007(us) but thats the same engine as the aurion..

That guy could have saved a little mess by doing it the way he should have. Around the 1:00 mark, he removes the oil filter casing without first draining it. You can see the plastic attachment that he removes from the filter at the 2:50 mark. From the service manual:

1) Connect the hose with an inside diameter of 15 mm (0.59 in.) to the pipe.

01sc4.png

2) Remove the oil filter drain plug from the oil filter cap.

03oy0.png

3) Insert the pipe with the hose into the oil filter cap. NOTICE: Be sure to insert the pipe with the O-ring installed on the oil filter cap side. HINT: Place the hose end into a container before draining the oil from the hose.

02pr9.png

4) Make sure that oil is completely drained, and remove the pipe and O-ring. HINT: Be sure to turn the pipe in the direction of the arrow to remove it.

04gm3.png

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership