Hey Man, Firstly, Welcome to TOCAU ;) To remove the stereo from a ZRE rolla. NOTE: do everthing slowly. Consider getting a small plastic painter scraper and some old cloths so you don't scratch anything. If you look face on to the centre console, yo can see 2 plastic pieces on each side of the stereo. Goto the top of the dash (near the window) and find the gap between the silver trim and the black dash. Carefully wedge your desired tool between both plastics and twist slowly. The silver trim should pop out. Repeat this all the way to the gear shifter and on the passengers side of the stereo. You then need to remove the air vents at the top of the console. this can be done much the same way as the silver trim, starting at the top and working down. Just remember that the hazard button is connected and and will need to disconnected for easier access. Once this is done, there is a small trim panel around the stereo. this can be pulled off gently by hand. This will also expose the 4 bolts holding the stereo in place. I suggest a 10 socket to remove the bolts. The stereo should then be freely accessible all round. NOTE: if you disconnect the stereo and you have a pin code set, you will need to re-enter it when you start up again. You can tell if there is a pin code enabled by looking for a red flashing light on the stereo with a Key as a symbol. Any further questions, please ask or drop me an SMS (look in profile for number)