-
Latest Postings
-
2
-
8
ECU Error P1660. What is it?
Hi all, long time no see! Tony, it definitely happens on 50 series as well. Our 2013 Aurion exhibits the same symptoms: engine and vsc lights came on, error codes P1660 and C1201. I erase them, they come back shortly after. Will report after I having it fixed.- 1
-
-
0
Steering rack
Hi I have to replace the power steering rack on my 100 series HDJ100R and I have been searching on line and apart from genuine there are a lot of cheap ones available and they all say non genuine which is not a problem but I don't want a cheap and nasty one. Has anyone replaced their rack with an aftermarket one and if so can you recommend a suitable site please. -
2
Whine on startup..
Does the sound change as it warms up ? I was thinking power steering pump and perhaps what Ashley mentioned with the water pump. If you're handy, you could remove the serpentine belt and spin all the accessories to see which gives up an unusual sound. -
7
P0303, rough idle, check VSC message.
Any photos or videos? Would love to be able to do the rear plugs and coils without the hassle of removing the intake etc. Also, how do you order parts from the Goss Mechatronics website or did you get it from somewhere else? -
4
P0356 - Ignition Coil 'F' Primary Control Circuit/Open
Thanks for the video Ashley. Yes my connector tab also broke when I did the coil change mentioned above. I just put it back on without the locking tab and it hasn't come loose in the 8 months I've been driving it since. But now I will do this cable tie trick to be a safe. Thanks again. -
2
Air conditioner not switching on when vehicle is started
I've just started having the same problem with my 2016 VX thats done 220,000kms. Plus the AC is so cold and won't generate any heat into the cabin and has just started leaking water/liquid into front passenger seat footwell. Would appreciate any tips anyone can give thanks. -
0
Head unit installation on HZJ79
Hey team I am currently installing a new head unit and speakers, I have got everything wired up and power is going to the head unit, but I am getting now sound, just wondering before I start trading all the wires to the speakers. Is there anything simple that might fix that, I know on some cars that you have to disconnect the factory amplifier, but I cannot find one yet. Just looking for advice what it could be. It is a 2002 Hzj79 -
1
Replacing the ignition barrel on 2007 100S LC
You can try nice locks & wheel nuts in Alexandria in Sydney they will have the complete new lock assembly all you will have to do is drill out the 2 shear head bolts & the lock housing comes apart fit the new assembly tighten up the new bolts till the heads shear off. Ray. -
1
Replacing the ignition barrel on 2007 100S LC
I have a defective ignition barrel on a 2007 model 100 series landcruiser. I have purchased a replacement barrel with new keys from Toyota and also watched the available UTube videos. The original key was stuck in the ignition and would not turn in any direction. I have finally been able yo remove this key but the ignition will still not turn. The switch position is somewhere close to the Acc position but not very sure if that is right. The radio does turn on but that is all. I cannot move the switch to a position to where I can feel the lock button engage so that I can push it down so that I can remove the barrel. Can anyone give me an answer to this problem please. Thanks Spikeke
-
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now