how to Install the scuff plate with led

[Aurion Shache]

Anyone know how to connect the wire for the LED scuff plate ? so when the door open the light will on, connect them to the dome light ? anyone have any ideas ?

thanks :)

[DJKOR]

Firstly, where did you find Aurion LED door sills? Secondly you have two options. If I was to do it, I'd connect each one to the corresponding door corner light. This means you need to run wires into each door. This keeps the installation neater as both wires (positive and negative) go to the same spot and will save you from running additional +12v lines to each door (if you wanted to ground it through the door switch). This method will also mean that each door sill will only turn on with the corresponding door. The other method as you said would be to use the dome light. You can do this either at the light itself or the only other place where the wire runs to is behind the glove box, and it's a tricky one to get to.

[Ingres]

Anyone know how to connect the wire for the LED scuff plate ? so when the door open the light will on, connect them to the dome light ? anyone have any ideas ?

thanks :)

Interesting, i think if you are able to get an Aurion LED scuff plate, there will be quite a number of interested party in this forum.. DJKOR will be one of them, since he did mention that he is working on a LED version himself.. let us know if you have the source for the scuff plate..

[Aurion Shache]

I get it from a Camry Accessories in China, They charge me extra 400 RMB (around 80 AUD ) to change the "camry" logo to the "Aurion ".

I will try to install it tomorrow.

[AUR30N]

I get it from a Camry Accessories in China, They charge me extra 400 RMB (around 80 AUD ) to change the "camry" logo to the "Aurion ".

I will try to install it tomorrow.

Can you please post picture of it and supplier in china?

I would connect it to the door switch.

AUR30N

[sx6er]

is there any local dealers i.e does toyota sell them. i remember seeing a set on a zr6 at a yard once. very interested too :D

[Tofuboi]

Very interested! Want to get some of these myself :D lol

[Electrician]

I get it from a Camry Accessories in China, They charge me extra 400 RMB (around 80 AUD ) to change the "camry" logo to the "Aurion ".

I will try to install it tomorrow.

Can you please post picture of it and supplier in china?

I would connect it to the door switch.

AUR30N

Sorry to bring back a 12 months old post Darryl. Just wondering if you had any luck with these? I would love a set too.

Cheers Tom

[DJKOR]

Sorry to bring back a 12 months old post Darryl. Just wondering if you had any luck with these? I would love a set too.

Any luck with what? Sourcing the sills? Making the sills? Or the wiring for it?

1) I never searched for them,

2) I never bothered finding someone to make some (needed a laser cutter)

3) Without having them, I didn't have the need to wire them up.

I have footwell lights running off the dome light though.

[Electrician]

Sorry to bring back a 12 months old post Darryl. Just wondering if you had any luck with these? I would love a set too.

Any luck with what? Sourcing the sills? Making the sills? Or the wiring for it?

1) I never searched for them,

2) I never bothered finding someone to make some (needed a laser cutter)

3) Without having them, I didn't have the need to wire them up.

I have footwell lights running off the dome light though.

Sorry I must have misunderstood.

I thought you were asking where they were obtained in the post (Posted 28 May 2009 - 08:59 PM

Firstly, where did you find Aurion LED door sills?)

I will follow the advice re the wiring to the door lights when and if I get them. (Secondly you have two options. If I was to do it, I'd connect each one to the corresponding door corner light. This means you need to run wires into each door etc)

It would seem they still arn't available in Australia.

Cheers Tom