[GB] Saikou Michi oil catch can (cut-off date 8/10/09)

[XploShun]

Hey ppl~!

I'm starting a group buy for the Saikou Michi oil catch can.

For more info, visit their homepage Saikou Michi Co. or message me if you have any questions.

It'll cost around $92AUD excluding shipping to Australia.

Shipping

$22AUD posted to you address

$14AUD if you're picking it up from me

1ZZ inlet valve size = 3/8" (9.525mm), outlet valve size = 5/8" (15.875mm)

1. XploShun - NSW (Paid)

2. ¥URO - NSW (Paid) (Matt black can with red splashes) (Pick-Up)

2ZZ inlet/outlet valve size = 3/8" (9.525mm)

3. thegourou20 - VIC (Paid) (Red can with white splashes)

4. Guni - VIC (Paid) (Red can with white square and black splashes )

5. cypher - WA (Paid) (Matt black can with red splashes)

6. iNdCeNt - NSW(Paid) (Pick-Up) (Purple can with black splashes)

7. kolourhero - VIC (Paid) (Red can with white splashes)

8. azzman372 - NSW (Paid) (Red can with white square and black splashes ) (Pick-Up)

9. Brad-dreama - NSW (Paid) (Gloss black with red splashes)

Put your name down or pm me if you're interested.

Cut-off date: 8/10/09

Received all the money! Paid Mr. Saikou!

cheers,

mic

Edited October 9, 2009 by XploShun
added approved line

[Kenneth]

Hey ppl~!

I'm starting a group buy for the Saikou Michi oil catch can.

For more info, visit their homepage Saikou Michi Co. or message me if you have any questions.

It'll cost around $92AUD excluding shipping to Australia.

Shipping

$22AUD posted to you address

$14AUD if you're picking it up from me

1. XploShun - NSW

2. ¥URO - NSW

Put your name down or pm me if you're interested.

cheers,

mic

Waw, really well priced... tempted!! but you do need approval from a mod for this group buy. Talk to someone local :)

[XploShun]

Waw, really well priced... tempted!! but you do need approval from a mod for this group buy. Talk to someone local :)

yep, i did.

michelle said it's ok :)

join us kenneth!

[cypher]

On the website it says that it's custom made, so am i correct in assuming an OEM fit >?

or do we need custom mounts made up ?

[XploShun]

On the website it says that it's custom made, so am i correct in assuming an OEM fit >?

or do we need custom mounts made up ?

he can customize nozzle size so this group buy is not only for ZZE12# corollas.

also, the nozzles can be relocated or/and replaced with AN fittings

mounts.. i don't know but it shouldnt be hard.

if we do get a lot of interest, we MIGHT be able to get him make one.. im not sure..

Edited September 7, 2009 by XploShun

[CME-LFT]

Ok sorry for the stupid question, but whats the point of a different catch can?

[Kenneth]

Waw, really well priced... tempted!! but you do need approval from a mod for this group buy. Talk to someone local :)

yep, i did.

michelle said it's ok :)

join us kenneth!

I will have a good think about it :) So if we have a couple in WA the shipping goes down by abit yea?

Oh I've added the approval line on the title.. hope you dont mind ..

[thegourou20]

I read here and there about the purpose of the catch can but I would appreciate people views whether it is worth it or not. At this stage, I am say 50-50 not quite convinced whether it would bring something to my car. I know i should only post here if I am interested in buying it or not but I will if I can see it is worth it.

[XploShun]

Waw, really well priced... tempted!! but you do need approval from a mod for this group buy. Talk to someone local :)

yep, i did.

michelle said it's ok :)

join us kenneth!

I will have a good think about it :) So if we have a couple in WA the shipping goes down by abit yea?

Oh I've added the approval line on the title.. hope you dont mind ..

thx kenneth

if there are a few WAians, then I can ask him to ship it to WA directly (1 address), then you guys dont have pay the extra $8

[XploShun]

Ok sorry for the stupid question, but whats the point of a different catch can?

I read here and there about the purpose of the catch can but I would appreciate people views whether it is worth it or not. At this stage, I am say 50-50 not quite convinced whether it would bring something to my car. I know i should only post here if I am interested in buying it or not but I will if I can see it is worth it.

saikou michi catch can are better than most because this dude uses mesh filter technique to help collect the fumes into droplets.

the mesh is also stainless.. so it'll last for a long long long time

not like other catch cans, which are just an empty tin.

didn't want 1 before, until i saw this >>>

spillige's ride (hope you don't mind man)

Edited September 7, 2009 by XploShun

[and1]

I found alot of oil just sitting in my intake manifold before I got my catch can. So it made my choice in getting one much easier. I've caught quite a bit of crap in mine as well.

CME-LFT: There actually isn't a catch can in the stock setup. It just goes from the pcv to the intake manifold.

If I didn't already have one. I would definately buy this one as I meshed my own catch can (mine was empty inside).

Ken buy one They are sexy!

[Kenneth]

does with come with everything you need? :)

e.g. hoses and clamps and what not ... i know it doesnt come with a bracket am i correct?

[kolourhero]

I'm in. I'll PM you my custom dimensions :D

[Guni]

I'm in. I'll PM you my custom dimensions :D

X2

[cypher]

does with come with everything you need? :)

e.g. hoses and clamps and what not ... i know it doesnt come with a bracket am i correct?

+ 1 for me if i can figure out what i need ( dimensions and custom fit ect ) ...

anyone with a facelift that can post up dimensions ?

[thegourou20]

I'm in. I'll PM you my custom dimensions :D

What custom dimensions do you have to provide because I thought we would all be the same? :-l

[XploShun]

does come with bracket but it probably won't fit into our car

no hose and clamps

for zze12# corolla, we're getting the stage 1 can, which is big enough for us..

custom dimension? don't think he'll make it in another shape

the hose size are the same for 1zz and 2zz

so we'll be getting the same thing as rocky's

for other cars.. you can join IF you know the nozzle size of your car

so anyone in??

[1rocky]

Xploshun hope you dont mind but here is some photos of my oil catch can still have not installed yet :lol:

it is the saikou michi catch can

also pics of hoses i am thinking of using.

[XploShun]

all good! i was gonna ask you to post some photos anyway! hahaha

thx rocky ;)

you can also get him to paint the trademark in other colours as well.. just like the 1s on his website

will have to confirm with Mr. Saikou thou

Edited September 8, 2009 by XploShun

[thegourou20]

Count me in as well. :)

[XploShun]

the stage 1 occ is 6" tall and 5" in diameter.

1. XploShun - NSW

2. ¥URO - NSW

3. thegourou20 - VIC

[Guni]

Count me in as well. :)

X2

Don't you dare leave me out John.

[XploShun]

Count me in as well. :)

X2

Don't you dare leave me out John.

1. XploShun - NSW

2. ¥URO - NSW

3. thegourou20 - VIC

4. Guni - WA?... dude, you want 2? :P

i'd like to pay for it next wkend

is that ok?

Edited September 9, 2009 by XploShun

[Guni]

1. XploShun - NSW

2. ¥URO - NSW

3. thegourou20 - VIC

4. Guni - VIC ( 1 freaking only thanks) <_<

i'd like to pay for it next wkend

is that ok? - OK

:lol: :lol:

Combine shipping with thegourou20 thanks.

[cypher]

any WAians ? Kenneth ?

i'll take one for the facelift ...

so no hoses and no brackets correct ? do we need to specify what colour etc we want ?

Edited September 10, 2009 by cypher