Jump to content


Corolla sills

Coreyd

By Coreyd
in Corolla / Corolla Sportivo Club

 Share

Recommended Posts


jaderd Grand Master

jaderd

Posted
Posted

many many ppl have done these mate, work well, just use scotch clips, easiest way to tap into the approproate wires, just work off door open sensor etc.

good little mod

check my old sportivo ride thread below, has it in there

Coreyd Enthusiast

Coreyd

Posted
  • Author
Posted

oooh i get you, your ones are basicly the same as the ones on the net, are they all made out of stainless or plastic underneath?

and1 Grand Master

and1

Posted
Posted

Mine's all metal :)

DSC_0163.jpg


danja Collaborator

danja

Posted
Posted

Are they readily removable without messing up the paintwork? Also, which part lights up??

and1 Grand Master

and1

Posted
Posted
Are they readily removable without messing up the paintwork? Also, which part lights up??

If you look through here Linky that shows you what lights up.

My ones do not light up. They are just the stainless finish ones.

They are removable as they are stuck on with double side tape and it doesn't sit on the paintwork anyways so no worries with damaging paintwork.

danja Collaborator

danja

Posted
Posted
Are they readily removable without messing up the paintwork? Also, which part lights up??

If you look through here Linky that shows you what lights up.

My ones do not light up. They are just the stainless finish ones.

They are removable as they are stuck on with double side tape and it doesn't sit on the paintwork anyways so no worries with damaging paintwork.

Haha, no wonder I was looking at the pic thinking "how the hell does solid metal light up?".

Thanks for the link, I'd seen these on eBay but wasn't sure how good the quality was, as with many parts on eBay. Sounds like there are a few happy campers here though, so I may just take the plunge.

NV N01 Enthusiast

NV N01

Posted
Posted
Are they readily removable without messing up the paintwork? Also, which part lights up??

If you look through here Linky that shows you what lights up.

My ones do not light up. They are just the stainless finish ones.

They are removable as they are stuck on with double side tape and it doesn't sit on the paintwork anyways so no worries with damaging paintwork.

Haha, no wonder I was looking at the pic thinking "how the hell does solid metal light up?".

Thanks for the link, I'd seen these on eBay but wasn't sure how good the quality was, as with many parts on eBay. Sounds like there are a few happy campers here though, so I may just take the plunge.

I have been considering getting them off ebay Also!.. just wasn't sure on what the finished product would be like.

After seeing all those pics, I think it would be a nice subtle mod.

Coreyd Enthusiast

Coreyd

Posted
  • Author
Posted

Thanks fella's yeah after reading this and doing my research im buying em and will post pics for every.

Coreyd Enthusiast

Coreyd

Posted
  • Author
Posted (edited)

All done only took a couple of days to ship and they look great

post-16102-1266394782_thumb.jpg

Edited by Coreyd
Coreyd Enthusiast

Coreyd

Posted
  • Author
Posted

i say to all go for it, its easy just watch the tape they give u its not that good.

post-16102-1266395018_thumb.jpg

post-16102-1266395078_thumb.jpg

Evo7 Grand Master

Evo7

Posted
Posted
i say to all go for it, its easy just watch the tape they give u its not that good.

the illuminating ones are fully hectic :P

i love them, but they look the biz :D

NICE B)

Evo

Jazz926 Rising Star

Jazz926

Posted
Posted
i say to all go for it, its easy just watch the tape they give u its not that good.

Agreed.

Ordered mine last Friday, and received it on the Monday.

Got mine done as well, I will post some photo's tomorrow :)

  • 4 weeks later...
Jazz926 Rising Star

Jazz926

Posted
Posted
Maybe a stupid question but where did you order them from, and if it is on ebay what did you type in to search for them? CHEERS

Hey Mate.

Most of the guys here got it from eBay, I myself included.

So far they are going great.

I got mine scuff plates for my ZRE from the seller below.

The link below should fit your ZZE

http://cgi.ebay.com.au/Toyota-Corolla-02-0...#ht_2919wt_1165

In the link below, it show how it looks on my ZRE.

http://au.toyotaownersclub.com/forums/inde...showtopic=26511

Cheers

TrolleyHopper Collaborator

TrolleyHopper

Posted
Posted

Cheers bro,

But ill have to wait till i knock of work to check it, Wont allow me into EBAY on work computer, haha but willl let me search forums all day.

Evo7 Grand Master

Evo7

Posted
Posted
ahh, the illuminated ones aren't on ebay anymore? :(

It appears the next generation of group buyers are upon us :D

Evo

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    2. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    3. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    4. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    5. 9

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    6. 9

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    7. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    8. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    9. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    10. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is and now working with nice cold air BUT every now and then we can hear and feel a buzz for a few secounds and today while my sister took my car I could her like a mild knocking sound when stopped but goes away when driving off. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
×
×
  • Create New...

Forums

News

Membership