Jump to content

Issues with near new Kluger

moomoocow

By moomoocow
in Kluger Club

 Share

Recommended Posts

moomoocow Explorer

moomoocow

Posted
Posted (edited)

Hi all,

I've got a Kluger MY11 KX-R which has done approximately 3000kms. Recently, I've experience a few weird issues with the car.

  1. On initial acceleration, there is a distinct shudder/rumble. It never used to do this, noticed it only recently.
  2. When driving at lower speed, the ride is quite bumpy & rough, as it as though as I am driving on a gravel road. I checked the tyre pressure, and they are all fine (sitting at around 36psi) and I even got the tyre balance checked out! Seems to be all okay. It somehow feels like the car has lost some power, hmm.
  3. 3When I am turning to the right, I can hear a faint a series of click click click.

Anyone else experienced this on their newish Kluger? It is bizarre. :help:

Edited by moomoocow
Link to comment
Share on other sites
  • 2 weeks later...
GK200 Collaborator

GK200

Posted
Posted

Hi,

I'm not an expert on your issues but take it back to the dealer. The turning noises may be something to do with being front wheel drive. The other issues may be a similar thing???

cheers. good luck

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 41

      gas smell when driving hard/takes long to start

      Update: issue came back but worse with rough idling / running a year or so ago. Mechanic diagnosed it as an air filter out of place and reset the codes - issue solved for good. Car is now at 380k and running stronger than ever !😊
      isaacw in Aurion / TRD Aurion Club
    2. 0

      O2 sensor issues

      Hi everyone, My kluger 2009 with 137250 kms was having P0420 code so I have installed a new O2 sensor now it shows different codes every time it will be P0032 and P2195 and so on what would be the exact reason for this please help solving this. 🙏🏻
      Nrupen in Kluger Club
    3. 0

      2012 Hilux with snorkel stopped after getting stuck in water

      Hi guys, my sons 2012 Hilux (diesel) engine stopped when he got stuck in a deep mudhole last night. I had a quick look after driving for about 130km with a car trailer to get his car and it has been immersed in muddy water over the top of the battery. The water level on the inside of the car apparently reached top of seat height before they managed to snatch it out of the water. The car has a snorkel, however, the engine stopped whilst the hilux was still immersed in the water up to its bonnet. What would have caused the engine to stop? Typically what would one expect to need to clean out, replace etc in order to sort this?
      ajecreative in Hilux Club
    4. 21

      FUEL WARNING MESSAGE

      Definitely can't get the pump out through the hole in the floor. The top of the pump has a larger diameter than the hole. 2nd pump has arrived from the wrecker. I will be removing the tank and installing it today.
      GeoffW in Landcruiser Club
    5. 21

      FUEL WARNING MESSAGE

      Jeez that's unfortunate. Here's hoping the next one makes it to the right place. I've spent a long time looking, but I haven't seen any videos or images where that mechanism has come out through the inspection hole - I really hope I've just been looking in the wrong place! I've got my fingers crossed for you Geoff!!
      KangaRooted in Landcruiser Club
    6. 2

      MWR Oil Pump

      Thanks for your response, I’m just hoping and praying that the oil pump will withstand the over-revving which is why I purchased the product. Also, I know very well about the flaws of the 2ZZ in regards to the oil pump and oil sump.
      Angrysubie64 in Celica Club
    7. 0

      1993 Celica 2.2

      How easy is it to replace power steering pump?
      brian mcs in Celica Club
    8. 2

      MWR Oil Pump

      MWR are a reasonably respected name in the aftermarket 2ZZ business, they're not the cheapest (especially with shipping) but the products are usually solid. In this case though it is only the oil pump gear itself which is upgraded (as that was the issue with the stock ones), the housing is new/refurbed OEM Toyota/Aisin. FYI 4340 is the grade used, it's a high-tensile chrome-moly steel. I believe the stock ones are sintered (ie powdered steel pressed in to shape at high pressure/temperature), which contributes to their propensity to shattering (although I think it is much rarer than people are lead to believe, and usually as a result of over-revving via mis-shifting)
      • 1
      • Thanks
      Hiro in Celica Club
    9. 0

      Engine starts but won’t rev, only idles. 2002 Hilux 4d4

      I left my fridge on in car for five days and it completely ran the battery flat. I have replaced with new battery and engine starts but only idols cannot be revved at all. Any ideas?
      Finnnbyysherr in Hilux Club
    10. 0

      Faulty speedo

      Hey everyone after advice .have a 99 hilux and my speedo will read fine one moment and then will read excessively high as in off the clock at about 60 and says I'm doing 90 at at 30 any idea's on what to check would be massively appreciated.
      Kevin james marriner in Hilux Club
×
×
  • Create New...

Forums

News

Membership