so much pain ! by tyre size

[Shadow_]

I current have this problem cause by my 245-35-20 tyres after i lowed i when for a guard rolled, also taken off the plastic protecting shield what you call it? now everytime i go over a uneven surface the tyres alway hitting the plastic things that holds the bumper and the upper body.....im so freak out soon or later it will snap the plastic ...anyone expreince with this problem?

[DJKOR]

This type of discussion has been covered years ago when people started putting 20's on their Aurion. All that information is in the forum here. For example:

http://au.toyotaowne.../16487-20-rims/

http://au.toyotaowne...rs-still-scrub/

http://au.toyotaowne...20680-20s-club/

I forgot I did, but I even mentioned something about that in the FAQ:

http://au.toyotaowne...cau-aurion-faq/

Q) I would like to lower my Aurion. What local options do I currently have, and which ones are better? Are coilovers available.

A) So far, the only options available locally are either King Springs or Pedders. There has been a lot of discussion over which brand is better, and realistically, it all comes down to personal preference. The King Springs tend to have the front of the car sitting higher than Pedders, but applications can vary. The Pedders are said to lower the car by approximately 42-45mm, and the King Springs will lower it by approximately 35mm.

You will most likely only get rubbing if you move to 20 inch rims and use a tire with a '35 profile' (eg. 245/35R20). Changing to a '30 profile' seems to help a fair bit. BONDIE has posted his experience in the last link below.

Currently, there are some coilovers available overseas aimed for the 07+ Camry. These would be a direct fit to the Aurion. For further information you can refer to their respective websites. KSport USA KONTROL PRO DAMPER SYSTEM, Megan Racing COILOVER DAMPER STREET SERIES, D2 Racing Sport RS COILOVERS, BC Racing COILOVERS.

When researching coilovers and you are looking at 07+ Camry coilovers, you just need to make sure they are compatible with the V6 Camry as there may be subtle differences that can affect performance and reliability when putting the I4 version coilovers on the Aurion. JIN on the boards here had fitted a set of BC Racing Coilovers and a link to his thread is the last link below.

Threads of interest:

AURION ON KINGS!!

Lowering - Aurion SX6, King springs

Suspension change that owner of aurion made

Kings or Pedders??

NEED HELP ON LOWERING INFO ABOUT RUBBING

Coilover Try out

----------