Jump to content

Recommended Posts

Posted

Very reminiscent of my Chaser. Although I had the 100k service done again as I had a leaking cam seal even though the major service had apparently been done prior.

Changing the diff bushes (with OEM ones) was about one of the best things I did, made changing gears so much nicer. That and the fact that it almost stopped axle tramping off the line in the wet or on boost.

Couldn't agree with you more on those symptoms. I'm actually that keen to replace them its not even funny. Going to organise another trip up to 612 to get it sorted, and possibly see my mate up there who is a painter. While washing on the weekend, paint started flaking off one of my mirrors (it was already pretty badly sun damaged) so good excuse to get them redone, and maybe a roof spoiler colour coded at the same time ;) yet to track one down yet though (for a reasonable price)

  • 2 weeks later...

Posted

lol once again - just like my car. The paint on my mirrors was chipping more with every wash, it got to a stage where almost 1/3rd of the paint was gone on the drivers side before I scored a set of genuine Ganador mirrors for a good price. 612 Auto also helped me change the diff bushes as well

  • 3 weeks later...
Posted

looking good! how did you go with the diff bushes?

That's also next on my list


Posted

looking good! how did you go with the diff bushes?

That's also next on my list

Mine too mate! Havn't gotten round to getting them in yet, shot Nick from North Shore an email today to get prices on OEM as well as the TRD replacements. Will go TRD if its not too much dearer. Not a fan of solid bushes either as its more or less a weekend cruiser/mountain climber and not a track warrior. Will be posting photos when its done and a little write up.

But yeah, gave it the first full detail since owning it last weekend before heading down for a couple of car meets, one of which happend to be an all JZX meet. So many ideas...

2BFBFBEA-D476-48CD-8F92-F3787EFC3D11.jpg

2FD11A13-D98E-4E6C-858F-06D0DEC8016A.jpg

BDC8FACA-92F5-4195-A709-8FFE2D891CC6.jpg

Also picked up a set of factory wheels, along with a brand new factory spare a while earlier. All the OEM goodness slowly coming together

245D0847-6CC3-4DB8-A73A-A3CA09010B34.jpg

Posted

hnnnggg ... soo much chasers in one pic ... cant contain

  • 4 months later...
Posted

Still alive, have moved house not once, not twice, but three times in the past 4 months. So yes, things have been hectic but finally settling down. The Chaser, unfortunately hasn't seen a great deal of change, went on daily duties for a while.

First house, driveway problems.

IMG_5283.jpg

IMG_5126.jpg

Successfully countered with trusty railway sleepers

IMG_5354.jpg

Made up straight through mid section which lasted all of a week after the drone gave me and the other half a mild migrain

IMG_5526.jpg

May still end up back on there depending on how things progress...

New bosses car, just a casual C63

IMG_5398.jpg

Loaded up to head to house number 2 in a new city

IMG_5561.jpg

Found Jeffy at the TCCA meet in Melbourne back in August

IMG_1622.jpg

Finally got a set of diff bushes and promptly put them in, dailying it made me realise how bad they were getting, had to be fixed

IMG_5762.jpg

Gave the diff a bit of a freshen up at the same time

IMG_5797.jpg

Took delivery of the new work bus - insane fuel economy

IMG_5914.jpg

Grabbed some kebabs one night

IMG_5880.jpg

Bought a set of AE112 side repeaters, only to find they wernt big enough to fit over the shocking hole the compliance workshop put in to fit the older SV20 repeaters...sticking with the ebay spec crystal ones for now :(

IMG_5865.jpg

FINALLY got clear corner markers, and did a headlight resto at the same time

Before:

IMG_5939.jpg

After:

IMG_5964.jpg

10712850_10152762764047095_2850129251643

So all in all, pretty happy with how the front end is looking these days. Need to clean up the grill at some point and figure out some nicer numberplates maybe along the line...oh and some black silicone joiners for the FMIC just to tidy things up

But for now, focus is getting a new fuel pump sorted, as whatever I have now is progressively getting louder and louder which im not really too happy about having the prospect of getting stranded on the side of the road one night.

Oh and re gassing the aircon, discovered it didn't work in the 30deg heat the other day, not alot of fun in peak hour >.< Booked in in a couple of weeks

  • 7 months later...
Posted (edited)

Does anyone still stalk these forums anymore?

11303924_1563694390549574_90243370_o.jpg

Few changes...

Edited by VIPZR6

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership